MV Agusta Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
Hello,

so I am picking up a 800 rr brutale and the owner had the rear set removed. He installed cnc racing rear set. Which also removed the passenger pegs. Im wondering if the retracting ones from the dragster would fit the brutale?

thank you
 

· Registered
Joined
·
223 Posts
Hello,

so I am picking up a 800 rr brutale and the owner had the rear set removed. He installed cnc racing rear set. Which also removed the passenger pegs. Im wondering if the retracting ones from the dragster would fit the brutale?

thank you
Hello !

And Yes, the Brutale Frame has the same holes for the pivot bracket. You will have to get the bracket for each side and the pegs for each side.
What is not going to work for you(you can check it with your bike), is that there is another bracket under the seat, that holds the pegs when they are in up position. You can get these bracket, but Brutale frame does not have the holes for this. With this, perhaps you can drill those holes if someone could give some reference measures or just try it after installing the dragster passenger pegs.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top