MV Agusta Forum banner

1 - 20 of 27 Posts

·
Registered
Joined
·
3,903 Posts
All pre 2010 bikes used larger front wheel bearings. The early F4 750 and 1000S as the Brutale 750, 910.., basically all with Showa forks, had larger spindles which fitted to the larger wheel bearings. Starting with the R or 312R models MV used a 25mm spindle and bridged the gap to the larger bearings with spacers. The 2010+ bikes have wheels with 25mm bearings which fit directly to the spindle. If You go for the earlier Star wheels, Brembo / Marchesini forged or ultra light forged in Magnesium or Aluminum, all can be fit to Your 2010+ with the spindle and spacers of the 312R, for an example.
As Donsy said the rear wheels fit on everything build by MV in between 1998 and 2013 without any trouble.
 

·
Registered
Joined
·
121 Posts
Discussion Starter #5
Thanks guys for the info. I am considering going to forged wheels to replace the cast ones on my 2012 F4R. Lusting after some BST carbons but budget not there at present. MV forum is the best.
 

·
Registered
Joined
·
14,495 Posts
all MV front wheels '99-'09 use a 6907-2RS....35 X 55 X 9 bearing

when they went to the RAC 50 forks the axle got smaller, but the wheels used the same bearings with a spacer

'10+ they're using the RAC 50s with the small axle, i don't know the bearing size...but i'm betting its the same

i have parts books for the <'10 bikes nothing later:stickpoke

my '05 F4 has radial bottoms on the Marzocchis for 310mm discs with the big axle and no spacers:drummer:
 

·
Registered
Joined
·
121 Posts
Discussion Starter #14
Communicating with CAG. He has spacers and wheels should be here next wk so I can check bearing and axle sizes. Thanks for the help. Ron
 

·
Registered
Joined
·
121 Posts
Discussion Starter #16
Looks like the axle and spacers used on a number of the earlier MVs will allow me to use the marchesini mag front wheel(35mm bearing) on my 2012 F4R. Specifically I ordered the ones for a 2007 Brutale 910R. Will let you know how it all goes when parts arrive.
 

·
Registered
Joined
·
121 Posts
Discussion Starter #17
Mag wheels installed using earlier axle and spacers. Had to do some minor mod to axle nut but straightforward. I think it looks great--see pics in gallery. Haven't figured out how to get picture in here as file was to large?:yo:
 

·
Super Moderator
Joined
·
22,071 Posts
Mag wheels installed using earlier axle and spacers. Had to do some minor mod to axle nut but straightforward. I think it looks great--see pics in gallery. Haven't figured out how to get picture in here as file was to large?:yo:

You don't have a photo album either, so no idea where you uploaded them too ?
 

·
Registered
Joined
·
121 Posts
Discussion Starter #19
Treated an album but it is still pending review--not sure how long that takes? You can see pic in the gallery by searching for 2012 F4R.
 
1 - 20 of 27 Posts
Top