MV Agusta Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
106 Posts
Discussion Starter #1 (Edited)
Hello I have some questions to our specialists,

does anybody know the diameter of the petcock for a 125 sport?

The only missing thing from my motor is the pickup from the ignition. A shop could provide me a replacement if I know the Ohm Ω of the ignition, maybe you have the specifications of the ignition.

A cable-tree of the 125 sport is existing or available over the MV UK club - or have I make it myself.

cheers

Helmut
 

·
Registered
Joined
·
576 Posts
Hi Helmut.

I think the fuel tap thread is 10mm diameter.

Ignition pick-ups are very rare for this type of ignition and i have not been able to supply any for a long time. I have measured the one on my own bike and it appears to be approx 65 ohms across the pick-up windings. I can't cross reference this with another as i don't have another! If you do find some that work and fit the existing system i would be very interested.

By 'cable-tree' i assume you mean wiring harness? If so the club can't help as we don't have any...sorry. You could try Hahn Kabeltecnik in Stuttgart as they used to do some MV harnesses www.hahn-kabeltechnik.de

All the best.

Dorian.
 

·
Registered
Joined
·
106 Posts
Discussion Starter #3
Thank you very much Dorian!

I'll keep you updated, if replacement pickup works. Yes of course, I mean the wiring harness - thx for your info - I'll get in contact with this company.

Your new MV arrived already....?

Br
Helmut
 

·
Registered
Joined
·
576 Posts
No worries Helmut, glad to help if i can.

The 'new arrival' is here and i will post a pick soon!:mouthwate

Dorian.
 

·
Registered
Joined
·
1,172 Posts
Aha so you got your hands on a black beast!

I never quite understood why the Count insisted on that particular shape of headlight, tank ank seat though. It's just not elegant and it's so very different from all the other MVs they were making at that time.

Albeit not my cup of tea, a truly iconic MV. And for its age, I bet it goes like stink :)
 

·
Registered
Joined
·
106 Posts
Discussion Starter #8
Congratulation Dorian, a great bike.

Would be great if you post some other pics.

Oepie, you never can have enought old MV, only a too small garage and for this challenge we'll find a solution.....

Cheers
Helmut
 

·
Cyber SPOTTER
Joined
·
6,101 Posts
Ah, the ugly duckling turned swan without even morphing - amazing. I must confess I've always loved the quirky look of those things! :)

Well done Dorian - (as usual :)) and congratulations. :highclap:

So, is true when one passes on if they have led a good & pious life they are sent to your garage? What a collection! :mouthwate :mouthwate :mouthwate
 

·
Registered
Joined
·
3,436 Posts
Aha so you got your hands on a black beast!

I never quite understood why the Count insisted on that particular shape of headlight, tank ank seat though. It's just not elegant and it's so very different from all the other MVs they were making at that time.

Albeit not my cup of tea, a truly iconic MV. And for its age, I bet it goes like stink :)
The same was said of the brutale headlight, which was inherited from porsche
 

·
Registered
Joined
·
106 Posts
Discussion Starter #11
Hello,

It seems that this company "hahn Kabeltechnik" has closed their doors. I'm, trying since weeks to reach them and sent some mails too. Any ideas, where I could have a chance to get the needed harness for a 125 Sport?

THX a lot,

Hmut


Hi Helmut.

I think the fuel tap thread is 10mm diameter.

Ignition pick-ups are very rare for this type of ignition and i have not been able to supply any for a long time. I have measured the one on my own bike and it appears to be approx 65 ohms across the pick-up windings. I can't cross reference this with another as i don't have another! If you do find some that work and fit the existing system i would be very interested.

By 'cable-tree' i assume you mean wiring harness? If so the club can't help as we don't have any...sorry. You could try Hahn Kabeltecnik in Stuttgart as they used to do some MV harnesses www.hahn-kabeltechnik.de

All the best.

Dorian.
 

·
Registered
Joined
·
3,905 Posts
Hello,

It seems that this company "hahn Kabeltechnik" has closed their doors. I'm, trying since weeks to reach them and sent some mails too. Any ideas, where I could have a chance to get the needed harness for a 125 Sport?

THX a lot,

Hmut
How about this web site Helmut ? www.edknet.de
 
1 - 13 of 13 Posts
Top