MV Agusta Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hi!
I recently bought me a 2001 750 F4, this is my first MV.
I must overhaul the rear hub. The former owner did support me with the bearings, but i am missing the seals. Can anyone help me specifications on the seals? And if so, how I can get hold of these.
I live in Norway.


Petri
 

·
Super Moderator
Joined
·
22,070 Posts
Hi Petri, welcome to the forum.
How many miles km's has the bike done, most of the time we only change the wheel side bearing, the needle roller bearing gets cleaned and greased and the seals stay in there.
 

·
Registered
Joined
·
9 Posts
Discussion Starter #3
Hi Petri, welcome to the forum.
How many miles km's has the bike done, most of the time we only change the wheel side bearing, the needle roller bearing gets cleaned and greased and the seals stay in there.
Thanks!

The bike has done 40K km. One of the previous owners did change both bearings at 20K km.I do not know if it is necessary, but i do it to sleep good at night. Rest of the bike seems good, just needs little bit of tlc.


Petri
 
1 - 5 of 5 Posts
Top