MV Agusta Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
445 Posts
Discussion Starter #1
Looking for a good mounting system for my iPhone. Can’t find anything that works with Dragster. Has anyone done this before? If so, what parts did you use?
 

·
Registered
Joined
·
1,909 Posts
I honestly think your best solution would be to get a gascap mount and mount your GPS/phone onto that with a rammount.

What I used for my F3 are TECHMOUNT TECH 4G GRIPPER & TECHMOUNT TECHMOUNT EURO MOUNT 50MM 4-70050X
https://www.ebay.nl/itm/Techmount-Device-Accessory-Mounting-TechGripper-Cradle-Universal-Device-Holder/122086184486?hash=item1c6ce75626:g:pecAAOSwMtxXsb8n
&
https://www.ebay.nl/itm/TECHMOUNT-TECHMOUNT-EURO-MOUNT-50MM-4-70050X-571-1015-/331686977778?hash=item4d3a15a0f2&_uhb=1

But looking at your handlebar and dashboard...that might not even work. Its so close together that it would probably block full steering.
 

·
Registered
Joined
·
1,180 Posts
Bought two mounts, one for GoPro (Small ball) and another for a TomTom navigation system (Larger ball).
It was necessary to loosen the clutch lever and slide toward the centre.

The company in the UK is called RyderMount: https://ridermount.com/[/url]

Images are of the TomTom mount
 

Attachments

·
Registered
Joined
·
55 Posts
There is a ram mount for the handle bar. Mount between clutch side switch and grip. Requires a little shaving on side to clear, but works well.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
39 Posts
Hi Bruce, Fortunately, my device (a combination GPS / Dash Cam phablet [detailed in another thread]) does not obscure the instrument cluster thanks to the stalks / arms chosen... plus the upright seating position of the Dragster lets me see over the device. The same applies to the 2nd RAM ball mount for the GoPro... a stalk / arm is used to position the lens to not record the instrument cluster. If you'd like, I could take another image while seated to show the relative positions. Take care / ride smart! M Squared
 

Attachments

·
Registered
Joined
·
1,180 Posts
Have to say from the attached photo that surprises me. Can you view all of the instrument information?

Awkward to access the key?
 

·
Registered
Joined
·
1,180 Posts
There is a ram mount for the handle bar. Mount between clutch side switch and grip. Requires a little shaving on side to clear, but works well.


Sent from my iPhone using Tapatalk
See photo, that is what I have, no shaving required, just move the clutch assembly nearer to the centre
 

·
Registered
Joined
·
445 Posts
Discussion Starter #10
Hi Bruce, Fortunately, my device (a combination GPS / Dash Cam phablet [detailed in another thread]) does not obscure the instrument cluster thanks to the stalks / arms chosen... plus the upright seating position of the Dragster lets me see over the device. The same applies to the 2nd RAM ball mount for the GoPro... a stalk / arm is used to position the lens to not record the instrument cluster. If you'd like, I could take another image while seated to show the relative positions. Take care / ride smart! M Squared
Thanks everyone for the posts but this is the exact setup I want to use. M Squared would you please post part numbers? I'm having a hell of a time locating the correct parts.
 

·
Registered
Joined
·
39 Posts
Hi Atom!

The 1” RAM Ball Mount I chose is from Composimo Fabrications, 'cuz I preferred the silver color:
>~$13.00
>Part Number CMO_5_0400_6mm, 6mm bolt included [for a Dragster])
>Universal 1" Billet BALLMount - 6mm Bolt

The alternate / ‘official’ RAM Ball Mount is black:
>~$11.00
>Part Number RAM-B-367U, which “employs an 8mm bolt or smaller” / you’ll need to purchase a 6mm bolt for a Dragster)
>https://www.rammount.com/part/RAM-B-367U

The RAM “Universal X-Grip Holder” is available in different sizes to accommodate your device (I used their “Tablet” size:
>~$36.00
>Part Number RAM-HOL-UN8BU)
>https://www.rammount.com/part/RAM-HOL-UN8BU

A RAM tether adds a second layer of security:
>~$4.00
>Part Number RAM-HOL-UN7TU)
>https://www.rammount.com/part/RAM-HOL-UN7TU

'Hope this helps... if you'd like additional images, just let me know. Enjoy!

Yours,
M Squared
 

Attachments

1 - 12 of 12 Posts
Top