MV Agusta Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Dears,
I'm looking for the distance shown in the picture like it is coming from MV.
In fact i don't have the tool 800093347 to set it as per manual, but i would restore the factory set up of suspension and seat height.
Now, i know that together with this regulation also the chain tension shall be considered, but without the tool i deem that this dimension like coming from MV factory should be a good starting point.
...or if you have other suggestions...please come!
Model is F4 1000S year 2005. Picture is indicative just to show what i'm looking for.

Thanks
 

Attachments

·
Super Moderator
Joined
·
22,072 Posts
Hi new fella.
That distance means little if you compare ride height to hub position, preload setting etc.... best is to try and borrow a ride height measuring tool.
At the end of the day you should ask yourself a few questions:
- What was done to the front when this lowering link was installed at the rear ?
- What does the bike feel/handle like now ?
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3
Thanks a lot!
But what i was typing...that picture is indicative, it is not my bike, but i'm looking for the factory set up. Surely my actual one is higher, since previous owner modified it.
if i will not find any chance to get this info, i will buy the tool and i will follow the manual. Surely my idea was to come back to original set up also on the front.
 
1 - 3 of 3 Posts
Top