MV Agusta Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
102 Posts
Discussion Starter #1 (Edited)
How are you all, have a bit of a problem, out riding and bike started running rough as guts when taking off, and felt unbalanced like it was on 2 cylinders! Further inspection while checking plugs, coils etc I found I was missing the spring between the two throttle bodies! See image, just seeing if anyone has had this issue before and know what the fix is or where I can get this tiny part from? See the images, one is of my bike missing, other is of same but with the srping!
 

Attachments

·
Registered
Joined
·
14,409 Posts
spring?

just ran across this problem on an RZ-350, same stupid Mikuni linkage

on the RZ there was nothing to locate one end of the spring.... there was a teat on one side but not the other...... I drilled and tapped it for a short screw and made a spring

in the RZ book the there is a warning "do not lose this spring"

probably not available:wtf::wtf::wtf:
 

·
Registered
Joined
·
14,409 Posts
?

Does it need to be a spring or could I run a bolt and nut setup
that will work, but drill and tap the far left piece in picture #1 post 2 and set it up like the opposing screw/spring

let the springs keep the screws in place...... tightening jamb nuts in there :jsm::jsm:
 
1 - 5 of 5 Posts
Top