MV Agusta Forum banner

21 - 27 of 27 Posts

·
Registered
Joined
·
125 Posts
Hahahaha...
It is not rust... I use gold chain and all shinny to the detail... hahahaha..

Here is the picture from the side:




:stickpoke Not to be a buzzkill but why in the world do your chain and rear sprocket look like a total rusted mess? Please tell me that isn't so... such a shinny bike but tho
 

Attachments

·
Registered
Joined
·
2,389 Posts
Hahahaha...
It is not rust... I use gold chain and all shinny to the detail... hahahaha..

Here is the picture from the side:
She's a very fine looking mistress - unique and well cared for....nicely done
 

·
Registered
Joined
·
105 Posts
Well I just installed a 7” headlight and housing. The headlight housing was a bit wider than the stock brackets but it fit in there. I wired in the plug from the headlight. Black is ground and the other two wires is one for high beam and low beam. I went outside and set up the light visually. It is MUCH brighter than the stock setup. I will post pics tomorrow.
 

·
Registered
Joined
·
105 Posts
Here are some pics. Again I just used the stock brackets. I was able to squeeze the housing into it. I have yet to ride it and see if it moves up or down. I used lock washers but not sure if that will be enough. If not will have to come up with some brace to keep it in place.
 

Attachments

21 - 27 of 27 Posts
Top