MV Agusta Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
14,683 Posts
removing injectors?

Sequim-MVF4;
remove the tank
remove the fuel rail.....try to keep the injectors in the throttle bodies....if they stick it the fuel rail, GENTLY pull on the body of the injector to remove it from the fuel rail

DO NOT BEND OR PULL ON THE WIRES CONNECTED TO THE INJECTORS OR THE PLUGS

now with your thumb, press down on the wire clip on the top of the injector plug, where the curved cutout is......if the clip is on upside down, hooks on top, remove it with your fingernail...now remove the plug....and the injector

cleaning them is a job for a professional
i use RCEngineering, Gramps invented the testing machines and taught Honda how to inject cars
http://www.rceng.com/Fuel-Injector-Cleaning-P43C0.aspx

Gramps went fast too.....
http://www.motorcyclemuseum.org/halloffame/hofimages/Collins1.jpg
Sorcerer was just a great bike.....and i was lucky enough to get to work on it too:drummer:
 

·
Registered
Joined
·
249 Posts
Sequim-MVF4;
remove the tank
remove the fuel rail.....try to keep the injectors in the throttle bodies....if they stick it the fuel rail, GENTLY pull on the body of the injector to remove it from the fuel rail

DO NOT BEND OR PULL ON THE WIRES CONNECTED TO THE INJECTORS OR THE PLUGS

now with your thumb, press down on the wire clip on the top of the injector plug, where the curved cutout is......if the clip is on upside down, hooks on top, remove it with your fingernail...now remove the plug....and the injector

cleaning them is a job for a professional
i use RCEngineering, Gramps invented the testing machines and taught Honda how to inject cars
http://www.rceng.com/Fuel-Injector-Cleaning-P43C0.aspx

Gramps went fast too.....
http://www.motorcyclemuseum.org/halloffame/hofimages/Collins1.jpg
Sorcerer was just a great bike.....and i was lucky enough to get to work on it too:drummer:
I made an Injector cleaner from a Gunsons Easybleed used on my Duc 916 injectors. Worked a treat on them.
 

·
Registered
Joined
·
14,683 Posts
?

I made an Injector cleaner from a Gunsons Easybleed used on my Duc 916 injectors. Worked a treat on them.
yes, you cleaned them.....
did you check the spray pattern?
how about the flow rate on a test bench, to 0.5%?

thats why i send them to RC:drummer:
 
1 - 4 of 4 Posts
Top