MV Agusta Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
115 Posts
Discussion Starter #1
Hello. I joined this forum a few years ago because I was in the process of buying an F4 Senna and got distracted by another Ducati!:mouthwate I have come back because I'm the proud owner of an '08 Brutale 910S in an apparently rare orange color. This is my 1st naked bike and MV and love it!

I have been doing some tasteful (subject to interpretation) to make it mine. Bike had very low miles and was definitely babied. So far mods I have made are; Arrow Carbon slip ons, Marchesini Forged wheels, custom alcantara seat w/ orange stitching and a box load of carbon bling, tail tidy kit and HID headlights. Unfortunately the owner discarded the OEM mirrors and I'm not a fan of bar ends. I have a few Rizoma mirrors waiting but have run into a hurdle I hope you can help with.

The OEM mirror mount (cap w/ pin) has been replaced by an aftermarket cover. I think it is a Rizoma part but can't be sure. My dealer told me I have to buy a whole new Nissin MC to get the part! Really? Using search features came up empty. I need the OEM part to proceed so if anyone has these "plates" I will buy them from you ASAP. Obviously I will need to get Rizoma adapters too. I'm a senior member of Ducati.ms and I know how resourceful we can all be in helping each other out. I'm looking forward to getting to know you and be a good resource in this forum. Thanks! :brutale:





 

·
Registered
Joined
·
1,699 Posts
Welcome back, with a bit of luck you might find someone who will do a swap.
 

·
Registered
Joined
·
825 Posts
M5zealot,

Welcome. Go to http://www.carpimoto.com site. Type in your bike and then 'Rizoma' under product search. Scroll to any Rizoma mirror and they have PDF's of adaptors for most bikes and universal mounts.

Cheers

Deano
 

·
Administrator
Joined
·
20,053 Posts
Always liked the orange 910S.
The plain clamps come from Motovation.
You can look at parts catalogs on Donsy's web site or ProItalia's web site to see if the OEM plates are listed separately.
I am keeping all my original parts or I would sell you mine. Maybe another forum member would part with theirs. You might contact CAG...never know, he may have a couple.
 

·
Registered
Joined
·
115 Posts
Discussion Starter #5
Thanks for all the suggestions. I'm dying to know though if my suspicions are correct about the OEM mounts. I have looked at a new 2013 Brutale on the showroom floor and it looks like the plate is flat. Hard to tell with a mirror stalk coming out of it. Does anyone have a pic of the mounting plate with the OEM mirror off? I just need a visual of the OEM mount w/ no mirror screwed in. I have determined no after market mounts and required Rizoma adapters will work w/ out the OEM mount.
 

·
Administrator
Joined
·
20,053 Posts
The clamps are not shown in the parts list, but you can get an idea of what they look like from the mirror drawings.
If I can remember I will dig mine out and take a photo for you.
I used one of mine to mount a attach a home made radar detector for a while. Just had to grind the head of the bolt I used down to fit into the hole.
 

Attachments

·
Registered
Joined
·
115 Posts
Discussion Starter #8
Welcome back.

I always love seeing your 900SP around town. Congrats on the Brute.
Thanks! She is with a new owner now. I miss her but the wail of the Brute makes hurt less.
 

·
Registered
Joined
·
115 Posts
Discussion Starter #9 (Edited)
The clamps are not shown in the parts list, but you can get an idea of what they look like from the mirror drawings.
If I can remember I will dig mine out and take a photo for you.
I used one of mine to mount a attach a home made radar detector for a while. Just had to grind the head of the bolt I used down to fit into the hole.
Oh so frustrating....I found a bigger pic online and the part we are talking about has no part #. It's not ever labeled with a #!
 

·
Registered
Joined
·
13,695 Posts
Your dealer is correct. It is not available separately. Ed's correct. You need to pm CAG. Even though he is a merchant of death these days, he still has time and parts for forum members.
 

·
Registered
Joined
·
241 Posts
Did you ever get the parts you need? I may have them...would have to dig in parts box; happy to do so this w/e. I'm local too...PM me if you still need parts.
 

·
Registered
Joined
·
115 Posts
Discussion Starter #14
Thanks everyone! Was able to source the needed plates from a totaled Brute! Now have to spend $80 for Rizoma adapters on top of $250+ mirrors!
 
1 - 14 of 14 Posts
Top