MV Agusta Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter #1 (Edited)
I was out riding today and I was asked about the RAM mounts. It was such a great solution post by MSquared. So it thought I would repost in case someone might be looking for something like this.

Posted by M Squared

The 1” RAM Ball Mount I chose is from Composimo Fabrications, 'cuz I preferred the silver color:
>~$13.00
>Part Number CMO_5_0400_6mm, 6mm bolt included [for a Dragster])
>Universal 1" Billet BALLMount - 6mm Bolt

The alternate / ‘official’ RAM Ball Mount is black:
>~$11.00
>Part Number RAM-B-367U, which “employs an 8mm bolt or smaller” / you’ll need to purchase a 6mm bolt for a Dragster)
>https://www.rammount.com/part/RAM-B-367U

The RAM “Universal X-Grip Holder” is available in different sizes to accommodate your device (I used their “Tablet” size:
>~$36.00
>Part Number RAM-HOL-UN8BU)
>https://www.rammount.com/part/RAM-HOL-UN8BU

A RAM tether adds a second layer of security:
>~$4.00
>Part Number RAM-HOL-UN7TU)
>https://www.rammount.com/part/RAM-HOL-UN7TU

'Hope this helps... if you'd like additional images, just let me know. Enjoy!

Yours,
M Squared

https://www.mvagusta.net/forum/53-brutale-b3-dragster/238429-ram-mounts-dragster-rr-2.html
 
  • Like
Reactions: esq'z me

·
Registered
Joined
·
363 Posts
Photos of your setup? I’ve got a RAM mount that originates from the ignition cover using just the CNC base of a steering dampener. Works like a charm.
 

Attachments

  • Like
Reactions: beetle53

·
Registered
Joined
·
75 Posts
Discussion Starter #3 (Edited)
Here are a couple photos. I used billet mounts MSQUARED found. It works pretty well. I can still see dash and camera takes nice video just above wind screen.
 

Attachments

·
Registered
Joined
·
75 Posts
Discussion Starter #4
Here are a couple photos. I used billet mounts MSQUARED found. It works pretty well. I can still see dash and camera takes nice video just above wind screen.
Here is a link to some video I took of ride in May with this setup.

 

·
Registered
Joined
·
363 Posts
Very nice. Just bought a dual ball base (RAM-B-217-1U) to do much of the same. Excited to run the camera in parallel to the phone (music, GPS, etc.)
 
  • Like
Reactions: beetle53

·
Registered
Joined
·
75 Posts
Discussion Starter #7
@;
Couldnt tell which, but one of the bikes didnt have a terribly healthy start. I dont know much about ducatis, but if that was yours, I'd get that looked at before your sprag clutch gets knackered
Good catch. I had forgotten about that. It was not my Dragster. It was my friends Multistrada 1260 in the beginning of video. He had a weak battery because he left his devices on while we stopped for a while. His GPS, Radar detector and other things. It was fine once he charged it up.
 

·
Registered
Joined
·
582 Posts
@;

Good catch. I had forgotten about that. It was not my Dragster. It was my friends Multistrada 1260 in the beginning of video. He had a weak battery because he left his devices on while we stopped for a while. His GPS, Radar detector and other things. It was fine once he charged it up.
Ah cool! Good to hear
 

·
Registered
Joined
·
363 Posts
Techmount fitted for TomTom navigator, can change to the GoPro by fitting the smaller ball
Bruce, what’s that OK/SET selector you’ve got?
 

·
Super Moderator
Joined
·
22,883 Posts
Huh.... newfangled technology. I’ve got steam gauges on mine.


On the new bikes, there is smoke in the wires. DO NOT let it out! :smoking:
 
1 - 15 of 15 Posts
Top