MV Agusta Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
So we had a little issue with the rear brake on the Dragster today. Search showed me some folks with issues on other MV’s pointing to overheating due to poor design/location. Not sure overheating is what’s happening here though. Could be.

So here’s the story. Bike has less than 400 miles on it and was out for a quick 45 min ride. It was hot out, about 90F but I don’t use the rear brake much on street if at all. Towards end of ride, I tried to use it to hold on a hill before starting off and it was just gone. Nothing there at all. No leaks, all fluid is still present. Hrs later, the pedal is still weak but I can get some friction. Everything looks ok.

Any advice is appreciated. Should I try some new fluid like some other did?
 

Attachments

·
Registered
Joined
·
396 Posts
See the complete thread on this subject

 

·
Registered
Joined
·
14 Posts
Discussion Starter #3
See the complete thread on this subject

Thanks man
 

·
Registered
Joined
·
14,532 Posts
This is not a General Maintenance question!
It is Model specific....
Look in the 3 cylinder Section or the one for your Cripple
 

·
Registered
Joined
·
14,532 Posts
This has long since been addressed and you’re weeks late to the party bud.
No, this bullshit goes on everyday, people don't read the Section titles,
and just post anything anywhere
Go look at "Tech Tips and Resources"
130 posts, maybe 10 should be there
It's supposed to be Solutions to Problems and where things come from
 

·
Administrator
Joined
·
20,030 Posts
Moved it !!
 
1 - 7 of 7 Posts
Top