[woowar800]

Hi Guys, I'm sure this question has been asked a million times but !
Where can I get the correct socket to fit the rear wheel nut on my new 800 RR?
Thanks in advance.

 

[esq'z me]

Welcome to the family..... How about an introductory post in the "New Members" section?
And please add your location on the planet (in the UK) to your profile.

All MVs use the same rear wheel socket....

Google search sent me here:

Wheel Nut Socket MV Agusta | Part No. 6354 | Part of the Motorcycle Wheels and Tyres range from Laser Tools

Laser Tools 6354 Wheel Nut Socket MV Agusta part of the Motorcycle Wheels and Tyres range of tools.

www.lasertools.co.uk

 

[GeorgeO]

search in ebay.

 

[XPARAUK]

Hello and Welcome

 

[theknurl]

woowar800 & Ed;
That socket won't work.....the small socket is 26mm, 2nd Gen bikes have 28mm front axle nuts
They say the socket is 56mm sort of makes me wonder

 

[RamRoddoc]

Mine (RC 800) has 55mm rear socket. I just adjusted the drive chain today and three trips to the tool store 2nd checked with my dial calipers and forgot to add slop. The parts specialist guy told me 58mm for the rear. I measured and the numbers closest to 54 that I returned.

But even I facked it up after measuring it today.

Good luck.

 

[silentservice703]

They are all 55mm with a 2 degree taper.