MV Agusta Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
475 Posts
Discussion Starter #1 (Edited)
So the MSRP on a new axle for an 09 seems to be 350 USD. I'm not a cheapskate but that's way too expensive for an axle.

My question is if it is possible to use the 09 alloy spacers on the 10 axle or if I need to have a custom spacer made by a machine shop.


Edit - I just bought a 2009 axle off of ebay, but not sure if it has the female threaded section or spacers.
 
1 - 1 of 1 Posts
Top