MV Agusta Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Maintenance & Tech. Issues (3 Cyl. Models)
    Hi Guys, I will be ajusting my valve clearance on my 2012 f3 675 very shortly and had a few questions I'd like help with before I dive into it. 1. Will shims with outer diameter 7.48 fit the f3? I have a hotcams shim set which I bought for my Daytona 675 2006. If not what is the outer shim...
  2. Brutale B4
    Hi, I'm doing a valve clearance check at 53,000kms and have the cams, buckets and shims out. The Engine Manual formula at Section B p. 43 reads: C) Calculate the D difference between the compared play and optimal play shown on the chart [see valve play specs]; D) Read the value of S thickness on...
  3. Maintenance & Tech. Issues (All 4 Cyl. Models)
    First of all, I would like to thank all of those who have posted previously with their experiences; which allowed me to go into this with a good idea of what was to come. Knowing that the cam stand bolts are a known issue, I stripped the top part of the bike, including coolant overflow tank...
1-3 of 3 Results
Top