|Topic Review (Newest First)|
|05-29-2017 03:42 AM|
When Buying the Discaccaiti Rotors I thought it would take at least 3 weeks for delivery, But 10 days later the rotors where at my door step.
ISR 4 piston Calipers for the MV F4 are 500$ each one finger power and fantastic feel,
Also ISR uses 4 pads for 4 piston caliper so air passes through the caliper and cools pads.
They never over heat. I think the fact ISR calipers are made from a single block of billet aluminum help keep them cool as well. ISR makes Great masters also but I personally do not like them as the levers are square .
Beringer.... There masters are built well, have exceptional feel But Beringer Calipers lack power. Fine for street riding but due to lack of power not a good choice for track days .
|05-28-2017 07:48 AM|
|Armando1969||Jake here is a picture of the Discacciati Calipers. I like the brand for their no-nonsense approach,no gimmicks just good quality parts.|
|05-28-2017 07:43 AM|
I rate them very high, the combo of the 16mm diameter Discacciati master with the brembo M50 calipers gives you a combination of a lot of braking power(one ore two finger brake) with great feel. On my Brutale i have the Discacciati Calipers with Brembo RCS19 master also great combination, i must say i like the brand very much. They are good in the two area's i find important, quality of workmanship and they look great.
|05-28-2017 06:55 AM|
Armano on my MV F4 !000R I have Discacciati red full floating front rotors. look great work well
How do you rate the Discaccati masters? I have tried /tested practically every brake or suspension brand on the Market in my superbike stable. Best Masters..Braking brand cam type masters power best feel best and cost only 265$ Brakes ....ISR.. Brembo race line performance cost roughly 50%. Suspension Nitron quality equal to ohlins cost 2/3 of Ohlins
Hope this helps Fellow Riders.... Jake
|05-27-2017 05:12 PM|
|Armando1969||Took it out today for a little trip(around 80km) to test wat i had done, great brakes with loads of feel. Realy like the combo of the brembo M50 calipers with the Discacciati 16mm master, the ABM clip-ons also makes the ride a lot more comfortable, they raise the clip-ons by around 30mm.|
|05-27-2017 04:20 PM|
|Armando1969||Here are some close-ups of the calipers with the titanium pistons.|
|05-27-2017 03:59 PM|
Finally have Everything installed on the bike, let me know what you think, i listed everything i have done to the bike here below:
-Discacciati Master brake cylinder and clutch.
-Brembo M50 Calipers with titanium, ventilated TiN coated pistons.
-Performance Triple clamp and central brakefluid reservoir for the clutch and brakemaster.
-ABM multi-Clip clip-ons, they are adjustable for height, angle of the clips etc.
-CNC clutch slave cylinder.
-Hel rvs brake-lines.
-Dot 5,1 brakefluid.
-See true connection lines from the reservoir to the two master-cylinders.
|05-08-2017 08:48 AM|
|Armando1969||And the galespeed VCR master that goes with the Brembo gp4 rx calipers.|
|05-08-2017 08:23 AM|
|Armando1969||I know it is blasphemy to post something other than MV. But this is my brake setup on my gixxer.|
|05-08-2017 08:14 AM|
|Armando1969||I've got the galespeed master on one of my other bikes, also very nice piece of kit.|
|This thread has more than 10 replies. Click here to review the whole thread.|