Established Member
|
LinkBack | Thread Tools | Display Modes |
Standard brake lever F3 800
Evening guys,
Bad day today. Coming home from work and cruising down a quiet bit of road at only about 15kph and some fuckstick (excuse the language) pulls out on me despite being daylight with a big red bike coming at im with highbeams on. I managed to stop in time (Thank you Brembo's) but lost my footing like an idiot and dropped it on my right hand side. The driver in question saw this and decided to speed off before taking any personal responsibility for driving like a moron.
Anyway, anger and stories aside, I have minimal damage but a snapped brake lever and despite what most may say I really like the factory brake lever on the Nissin master cylinder. Can anybody tell me what lever this is and where I may be able to purchase one? There are lots of aftermarket options but I'm happy with the factory and if I replaced the brake with aftermarket I'd have to do clutch too which would be a bit more money.
Sorry if this has been answered before, I did a quick search but found nothing.
Bike is a 2015 F3 800 red/silver
Bad day today. Coming home from work and cruising down a quiet bit of road at only about 15kph and some fuckstick (excuse the language) pulls out on me despite being daylight with a big red bike coming at im with highbeams on. I managed to stop in time (Thank you Brembo's) but lost my footing like an idiot and dropped it on my right hand side. The driver in question saw this and decided to speed off before taking any personal responsibility for driving like a moron.
Anyway, anger and stories aside, I have minimal damage but a snapped brake lever and despite what most may say I really like the factory brake lever on the Nissin master cylinder. Can anybody tell me what lever this is and where I may be able to purchase one? There are lots of aftermarket options but I'm happy with the factory and if I replaced the brake with aftermarket I'd have to do clutch too which would be a bit more money.
Sorry if this has been answered before, I did a quick search but found nothing.
Bike is a 2015 F3 800 red/silver
Sponsored Links | |||
Advertisement |
|
Senior Member
Join Date: Dec 2015
Location: Sydney
Posts: 295
Sorry to hear of this incident some drivers are extremely unaware of motorbike's on the road.
OEM parts are available through site sponsor Startwin, follow there link in the market place and go through the parts fisch, the site is really good and easy to navigate
But be warned shipping to Aus (and I presume NZ) is expensive, like ?40 before you even purchase the part...
OEM parts are available through site sponsor Startwin, follow there link in the market place and go through the parts fisch, the site is really good and easy to navigate
But be warned shipping to Aus (and I presume NZ) is expensive, like ?40 before you even purchase the part...
seen a few on ebay in the states .. this one is on right now in Florida. I know you have an 800.. not sure if they are different but kinda doubt it, although I have been wrong before
try this link:
https://www.ebay.com/itm/361796611157
try this link:
https://www.ebay.com/itm/361796611157
Last edited by Solveep; 11-01-2016 at 11:26 AM.
Sponsored Links | |||
Advertisement |
|
or, if you are talking about the front brake lever. maybe one of these?
https://www.ebay.com/itm/322270034101
https://www.ebay.com/itm/381829501201
https://www.ebay.com/itm/322270034101
https://www.ebay.com/itm/381829501201
Established Member
This latter one is the thing I'm looking for, same lever. However I now need to try and find just the lever itself instead of the whole assembly or accept burning even more money
I can get a set of Puig levers that fit for less than that one, but need to see what I can find.

I can get a set of Puig levers that fit for less than that one, but need to see what I can find.
Senior Member
Join Date: Jun 2016
Location: Lancashire, England
Posts: 451
Where are you based?
If in uk I bought a pair of new levers but only used the clutch...
If in uk I bought a pair of new levers but only used the clutch...
Take a chance while you still got the choice.
F3-800 / RVF400. Lancashire, England.
Senior Member
Am I right in thinking that GSXR 600 750 1000's use the same master cylinder and leaver?
How bout this? PM me... It just dawned on me..
I was sideswipped by a car back in Septemer.. In the fall/slide I broke my clutch lever.
I ordered a new set of adjustable levers, I have not taken mine off yet but I will gladly sell it to you! just the lever!
I was sideswipped by a car back in Septemer.. In the fall/slide I broke my clutch lever.
I ordered a new set of adjustable levers, I have not taken mine off yet but I will gladly sell it to you! just the lever!
Established Member
Quote:
Originally Posted by Solveep
View Post
How bout this? PM me... It just dawned on me..
I was sideswipped by a car back in Septemer.. In the fall/slide I broke my clutch lever.
I ordered a new set of adjustable levers, I have not taken mine off yet but I will gladly sell it to you! just the lever!
I was sideswipped by a car back in Septemer.. In the fall/slide I broke my clutch lever.
I ordered a new set of adjustable levers, I have not taken mine off yet but I will gladly sell it to you! just the lever!

Established Member
Quote:
Originally Posted by manicguitarist
View Post
Where are you based?
If in uk I bought a pair of new levers but only used the clutch...
If in uk I bought a pair of new levers but only used the clutch...
«
Previous Thread
|
Next Thread
»
Thread Tools | |
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
Display Modes | |
|
Posting Rules | |