F4S Tank Removal / PCIII Installation - MVAgusta.net
 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 01-31-2006, 05:28 PM Thread Starter
New Member
 
Join Date: Jan 2006
Location: San Jose, CA
Posts: 34
F4S Tank Removal / PCIII Installation

Anyone have some quick tips on what to look out for? I'm installing a PCIII and need to remove the gas tank..

Any tips for installing the PCIII on a F4S?

Thanks,

Alex
amarzano is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 01-31-2006, 07:20 PM
 
Join Date: Dec 2005
Posts: 474
DRAFT SOP
- Remove the seat plastic at the hinge.
- Remove Silver side tank covers (maybe not necessary but easier to see front mounts)
- Remove a single bolt at the rear of the tank. Front mounts just push against a frame rail.
- Unclip two quick connectors to release (fuel supply and return) that detach on the tank end.
- Detach single plug from loom to fuel pump to disconnect.

Not sure what kays you have on yours, but with it off might pay to inspect/clean the tank out. Maybe even change the fuel filter if you are near needing it.

Do you need to do this to tap into the loom? TPS?

Cheers
Al
Steptoe is offline  
post #3 of 8 (permalink) Old 01-31-2006, 07:47 PM
Senior Member
 
Velocemoto's Avatar
 
Join Date: Jul 2005
Location: Melbourne, Australia
Posts: 3,007
Quote:
Unclip two quick connectors to release (fuel supply and return) that detach on the tank end.
....and just be careful not to pinch the rubber "O" rings when refitting
Velocemoto is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 01-31-2006, 11:49 PM
 
Join Date: Dec 2005
Posts: 474
...and take care not to break them as they are AUD$115 ea., inclusive of hose and clips, to replace.

Anyone know if available aftermarket, for next time
Steptoe is offline  
post #5 of 8 (permalink) Old 02-01-2006, 12:35 AM Thread Starter
New Member
 
Join Date: Jan 2006
Location: San Jose, CA
Posts: 34
The PCIII harness plugs into the injectors and the stock harness into the PCIII. There is also 1 tap into the TPS. I might be able to reach the TPS, but I think the injectors will require the tank to be off..

Thank you.

Alex
amarzano is offline  
post #6 of 8 (permalink) Old 02-01-2006, 03:13 AM
 
Join Date: Dec 2005
Posts: 474
Quote:
Originally Posted by Myself
Anyone know if available aftermarket, for next time
I should've looked harder and closer. The fittings are marked CPC not CRC as I had first assumed.

Turns out they are made by a company called Colder Products Company. If/When I find out part numbers and pricing, I'll post it up.
Steptoe is offline  
post #7 of 8 (permalink) Old 02-19-2006, 07:49 PM
Senior Member
 
Gladio's Avatar
 
Join Date: Sep 2005
Location: Tennessee
Posts: 1,047
There is info on the fuel link connectors in the FAQ

http://mvfaq.blogspot.com/2005/09/fu...-fittings.html

Jack
Gladio is offline  
post #8 of 8 (permalink) Old 02-20-2006, 01:27 AM
 
Join Date: Dec 2005
Posts: 474
My enquiry appears to have fallen on deaf ears at CPC.

Someone in OZ (topper?) posted that they got the triumph ones and they fitted straight on.
Steptoe is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome