Finished custom F3 exhaust - MVAgusta.net
 5Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 11 (permalink) Old 02-27-2018, 10:24 PM Thread Starter
Established Member
 
mgucci's Avatar
 
Join Date: Jun 2017
Location: NC, USA
Posts: 78
Finished custom F3 exhaust

Finally finished the exhaust of my F3. Started with open heads and it was too loud so I used some u bend piping to add some of the good back pressure and added a in pipe silencer.

I used MDI for a custom carbon fiber panel, They took about 5-6 weeks. I had to make the exhaust hole slightly larger, and they did send me the wrong carbon fiber weave but it was my first carbon panel on this bike so I was ok with it. When I get more I will just match the twill matte. I would consider using them again, they are prob the cheapest and you get what you pay for.

I have a sound clip but I don't think I can attach it.

My next mod will upgrade the rear shock. I think im going for the Nitron R1 since I don't normally play with the shock setting to much and use the track lightly.
Attached Images
  

Last edited by mgucci; 02-27-2018 at 10:26 PM. Reason: added info
mgucci is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 02-28-2018, 09:45 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,823
Send a message via Skype™ to silentservice703
INteresting mod and lovely result.

Have you tuned your ECU to the exhaust modification?

On a side not, your chain tension looks to be pretty tight...too tight actually. I would check and adjust.
jdgun and jdgun like this.

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #3 of 11 (permalink) Old 02-28-2018, 11:34 AM
Senior Member
 
Join Date: May 2017
Location: Salem, Oregon
Posts: 528
Very nice, would love to see the piping and how you ended up bending, it etc. kinda like a taylor made system.. I like it
jdgun is offline  
Sponsored Links
Advertisement
 
post #4 of 11 (permalink) Old 02-28-2018, 11:42 AM
Senior Member
 
Black_Gold_Saw's Avatar
 
Join Date: Jul 2016
Location: Netherlands
Posts: 1,600
New Site Garage
Looks good. And at the same time weird, beqause of the backwheel being so OPEN. Almost looks like a extended swingarm mod.

PS: Nice helmet Got the same

"Mileena"
MV Agusta F3 675 '17 - Matt Avio Grey


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Black_Gold_Saw is online now  
post #5 of 11 (permalink) Old 03-05-2018, 10:06 PM Thread Starter
Established Member
 
mgucci's Avatar
 
Join Date: Jun 2017
Location: NC, USA
Posts: 78
Im using rapid bike tune, Im not a fan of the extra wiring but it works good. Im looking to run race fuel and ill have to have the map set up for the fuel...
I have the stock tension adjuster set to about 3/4 to the max adjustment and left extra chain links to compensate. when I go to the track I mostly use the drag strip. Im also running lust racing lowing links so that adjust the rear swing arm location as well.
mgucci is offline  
post #6 of 11 (permalink) Old 03-05-2018, 10:08 PM Thread Starter
Established Member
 
mgucci's Avatar
 
Join Date: Jun 2017
Location: NC, USA
Posts: 78
O and correct me if im wrong but I measure the chain play parallel with the mark on the swing arm and not straight up and down.
mgucci is offline  
post #7 of 11 (permalink) Old 03-06-2018, 05:06 AM
Senior Member
 
R1andrew's Avatar
 
Join Date: Jul 2006
Location: South Carolina
Posts: 7,527
New Site Garage
Nice. I would like to see what 3 pipes coming out the side would look like. I liked the fact that MV did the 4 pipes for the 4 cylinder and 3 pipes for the 3 cylinder bikes.
R1andrew is offline  
post #8 of 11 (permalink) Old 03-06-2018, 08:07 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,823
Send a message via Skype™ to silentservice703
Please download the manual...and READ it.

Here is an excerpt from the manual for your bike:

Name:  F3 Chain Measurement.jpg
Views: 263
Size:  284.5 KB

Donsy spent a ton of time working with other members of this forum to provide manuals free of charge here: Team Double 3 Racing | MV Agusta

These machines can kill you easily if you don't understand what you are doing. MV Agusta motorcycles in particular have some interesting design features that make them out of the norm when performing adjustments such as Ride Height and chain tension. Take some time to learn your basic machine. To make a major mod on a new to you bike without rudimentary knowledge is flat out dangerous.

Hopefully you will remap your ECU so this mod doesn't simply roast your engine.

Sorry for the rant; but, please.....

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #9 of 11 (permalink) Old 03-06-2018, 11:18 AM
Senior Member
 
number2's Avatar
 
Join Date: Jan 2009
Location: Charleston South Carolina
Posts: 5,541
I usually just make sure the chain flops around and leave it that way. Then I don't have to worry about it being too tight.
number2 is online now  
post #10 of 11 (permalink) Old 03-08-2018, 10:32 PM Thread Starter
Established Member
 
mgucci's Avatar
 
Join Date: Jun 2017
Location: NC, USA
Posts: 78
I initially wanted to do 3 pipes out of the side but that is over my head with customizing and my welding skills are not at that level. the space is tight and it needs custom bends to get the proper radiuses. The QD looks like a good base to try it with but im not about to spend well over 1k to just cut up the muffler.
mgucci is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome