Dragster RR Dynojet Power Commander V Question - MVAgusta.net
 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 09-27-2016, 02:16 AM Thread Starter
New Member
 
Fishcookie's Avatar
 
Join Date: Nov 2015
Location: Port Motueka
Posts: 23
New Site Garage
Dragster RR Dynojet Power Commander V Question

Hi team,

I'm wondering if someone electrically/ fuel map minded can help.
I have been in contact with Dynojet and the only version they have for six injectors is the Dynojet Power Commander V (24-007) MV Agusta F3 2013-2015. (This comes with secondary fuel module to control all injectors)

Does anyone know if this will work in a 2015 Dragster RR? What do I need to check/ compare between the two bikes?

Here's a link for fitting:
http://www.powercommander.com/downlo...I24-007.02.pdf

I'm planning to also go for the AT-100 autotune unit if it the Power Commander works.

Many thanks,

Jon B in Motueka, New Zealand.
Fishcookie is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 09-27-2016, 03:27 PM
New Member
 
Join Date: Jul 2015
Location: Portland OR
Posts: 30
I've wondered this same thing, there's also the Bazzaz unit for the F3 with the dual Injecters. I don't recall anyone doing filter, pipe and tune on the 3 cyclinder and posting results.
Rob G is offline  
post #3 of 10 (permalink) Old 10-20-2016, 12:55 AM Thread Starter
New Member
 
Fishcookie's Avatar
 
Join Date: Nov 2015
Location: Port Motueka
Posts: 23
New Site Garage
There hasn't been much response on this so I guess they don't work. Would be great to fix the lower rpm spots.
Fishcookie is offline  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 10-20-2016, 07:05 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,926
Send a message via Skype™ to silentservice703
I would ask Power Commander that question.

I don't believe any piggy-back system will fix the dip.

You have to be able to tune the actual ECU in that range.

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #5 of 10 (permalink) Old 10-20-2016, 01:05 PM
Senior Member
 
Join Date: Dec 2014
Posts: 1,188
There are more and more people who can tune the eldor ecu in the 3 cylinder bikes. This (providing it's done properly) will be a far better solution and will probably ultimately be cheaper.
Jono is offline  
post #6 of 10 (permalink) Old 10-20-2016, 07:09 PM
New Member
 
Rognin's Avatar
 
Join Date: Jul 2016
Posts: 28
New Site Garage
I've put a Bazzaz Z-AFM, Sprint Filters SP series air filter with a evolutionbike.it header (cat delete) and Bodis exhaust with the Ti straight-pipe on a dragster 800rr MY15. I went from 112 rearwheel to 123. Dunno about torque as the guy didn't keep the charts for me to look at and gloat about.

Also, the barometric pressure was quite low that day so it could have been a good 10% higher end results.

I'd say you'll gain 10% top end HP and torque, but the difference isn't that much in the top end but the mid range throttle response. It's goes freakin' ballistic.

Be warned, there's absolutely no space to install the PCV or Bazzaz unit on a dragster. I had to resort to an 8 cell LIPO battery to get it to fit inconspicuously.

Rognin is offline  
The Following User Says Thank You to Rognin For This Useful Post:
post #7 of 10 (permalink) Old 10-21-2016, 07:37 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,926
Send a message via Skype™ to silentservice703
Rognin, did all of that fix the low end fueling?

Can you post the Dyno Charts so we can see the results?

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #8 of 10 (permalink) Old 10-21-2016, 12:20 PM
Senior Member
 
Join Date: Dec 2014
Posts: 1,188
Quote:
Originally Posted by Rognin View Post

I'd say you'll gain 10% top end HP and torque, but the difference isn't that much in the top end but the mid range throttle response. It's goes freakin' ballistic.
Could you bring it round so I can try it - that sounds exactly what I need....
Jono is offline  
post #9 of 10 (permalink) Old 11-16-2016, 01:07 AM Thread Starter
New Member
 
Fishcookie's Avatar
 
Join Date: Nov 2015
Location: Port Motueka
Posts: 23
New Site Garage
Quote:
Originally Posted by Rognin View Post
I've put a Bazzaz Z-AFM, Sprint Filters SP series air filter with a evolutionbike.it header (cat delete) and Bodis exhaust with the Ti straight-pipe on a dragster 800rr MY15. I went from 112 rearwheel to 123. Dunno about torque as the guy didn't keep the charts for me to look at and gloat about.

Also, the barometric pressure was quite low that day so it could have been a good 10% higher end results.

I'd say you'll gain 10% top end HP and torque, but the difference isn't that much in the top end but the mid range throttle response. It's goes freakin' ballistic.

Be warned, there's absolutely no space to install the PCV or Bazzaz unit on a dragster. I had to resort to an 8 cell LIPO battery to get it to fit inconspicuously.

Nice Rognin,

Which Bazzaz unit? I looked at these and none were Dragster RR specific?
This one:
http://www.bazzaz.net/index.php/mv-agusta/f3-800-13-15

With Z-Fi and Z-AFM?

I also installed the Sprint filter and went with the FM Exhaust.
Did you get a dyno result? That would show what it all does.
I have been looking at a LIPO battery to get some space/ less weight, though a bit scared it may fry the electrics. Did you go Shorai LFX19A4-BS12?

Thanks for letting us know your experience
Fishcookie is offline  
post #10 of 10 (permalink) Old 07-17-2017, 11:38 AM
New Member
 
Join Date: May 2016
Posts: 9
Ronin do you have an image of the bazza map you are using so I could compare it to the map I have in my dragster
coldham76 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome