I take it you maybe want to remove the arm which holds the rear plate, and install a tail tidy, I have the dragster and have done so. You can order shorter replacement bolts (8000B2752) that are used on the F3 or the B3 Brutale from your MV dealer as they are interchangeable and were only $30 NZD the pair . From my understanding the bolts need to be a specific designated MV bolt to suit the threads pitch on the eccentric hub, the alternative is you can make a spacer from some tubing Inside Diameter 12mm max OD 18mm cut to 30mm long and still use the longer bolts once you remove the lisence plate arrm as I also had done prior to recieving the shorter bolts.
Design Corse also sell titanium ones if you so wish http://www.designcorse.com/products/...ant=4230216833
Last edited by Azza; 09-08-2016 at 06:36 AM.