New EVR Slipper Clutch installation questions - MVAgusta.net
 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 06-26-2017, 05:14 AM Thread Starter
Senior Member
 
Spud's Avatar
 
Join Date: Jul 2006
Posts: 513
New EVR Slipper Clutch installation questions

Just had delivery of new EVR slipper clutch for my 312R and need some advise on fitment

I see i need to install the pressure plate bearing from the existing pressure plate into the new EVR plate

1. Is this a SLIDE/PUSH fit as it seems quite tight compared to the original pressure plate ??

2. Also from the drawings, i am assuming i don't need the 2 thin steel spring/plate (8000A6922/8000A6923) that go on before the friction plate stack ?

3. It mentions the first friction plate as "Sintered Plate Oversize" - is the the MV normal 1st plate 8000A6915 that has the larger inside diameter ??

http://www.edovignaracing.com/en/sli...structions.pdf
Attached Images
 

[SIGPIC][/SIGPIC]
Spud is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 06-26-2017, 07:31 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,821
Send a message via Skype™ to silentservice703
I know that when I did this to my Ducati Monster, the pressure plate bearing was a press fit. I actually mucked up the first bearing and had to get another.

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #3 of 10 (permalink) Old 06-26-2017, 08:59 AM Thread Starter
Senior Member
 
Spud's Avatar
 
Join Date: Jul 2006
Posts: 513
Quote:
Originally Posted by silentservice703 View Post
I know that when I did this to my Ducati Monster, the pressure plate bearing was a press fit. I actually mucked up the first bearing and had to get another.
Yep, i've just pressed it in with a drift - wasn't that tight, but more more than the standard pressure plate.

[SIGPIC][/SIGPIC]
Spud is offline  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 06-28-2017, 03:46 AM Thread Starter
Senior Member
 
Spud's Avatar
 
Join Date: Jul 2006
Posts: 513
Anybody know what plate is put in first ??

"Sintered Plate Oversize"

8000A6915 or 8000A6917 ???

[SIGPIC][/SIGPIC]
Spud is offline  
post #5 of 10 (permalink) Old 06-28-2017, 05:02 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,821
Send a message via Skype™ to silentservice703
Well, the 8000A6917 is described as First Clutch Plate and the others are listed as Driven Clutch Plate...I'd go with 8000A6917.

8000A6917 is also shown first in the assembly diagrams on EVOLUTINBE BIKE's website.

Is there a dimensional difference in thickness?

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #6 of 10 (permalink) Old 06-28-2017, 05:44 AM Thread Starter
Senior Member
 
Spud's Avatar
 
Join Date: Jul 2006
Posts: 513
Quote:
Originally Posted by silentservice703 View Post
Well, the 8000A6917 is described as First Clutch Plate and the others are listed as Driven Clutch Plate...I'd go with 8000A6917.

8000A6917 is also shown first in the assembly diagrams on EVOLUTINBE BIKE's website.

Is there a dimensional difference in thickness?


See below MV clutch diagram

4 is 8000A6915

6 is 8000A6917

They are different from the rest of the clutch pack.

4 has a much larger INSIDE diameter to allow the 2 steel spring plates 18/19 and is the first of the friction pads to put on
6 has more condensed/larger friction pads on it and is the last of the friction pads to put on


EVR just mention Sintered Plate Oversize" which could mean anything....??
Attached Images
 

[SIGPIC][/SIGPIC]
Spud is offline  
post #7 of 10 (permalink) Old 07-04-2017, 07:06 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,821
Send a message via Skype™ to silentservice703
Then ask EVR....

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #8 of 10 (permalink) Old 07-04-2017, 08:40 AM
Senior Member
 
Join Date: May 2015
Location: Singapore
Posts: 795
Quote:
Originally Posted by silentservice703 View Post
Then ask EVR....
+1

My friend just installed EVR into his Panigale R, he also had an issue and emailed EVR who responded within 30mins (amazing for an Italian company!)
All sorted after that.
jhollis is offline  
post #9 of 10 (permalink) Old 07-04-2017, 09:00 AM Thread Starter
Senior Member
 
Spud's Avatar
 
Join Date: Jul 2006
Posts: 513
Quote:
Originally Posted by jhollis View Post
+1

My friend just installed EVR into his Panigale R, he also had an issue and emailed EVR who responded within 30mins (amazing for an Italian company!)
All sorted after that.

I had a response from EVR a few days ago....

"
Hello Paul,

we recommend that the "Sintered Plate Oversize" – must be the plate that has the larger inside diameter."

So 8000A6915 it is..

[SIGPIC][/SIGPIC]
Spud is offline  
post #10 of 10 (permalink) Old 07-04-2017, 09:04 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,821
Send a message via Skype™ to silentservice703
Excellent.

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome