F4 750 dashboard not working - MVAgusta.net
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 11-02-2016, 06:14 PM Thread Starter
New Member
Join Date: Oct 2016
Posts: 4
F4 750 dashboard not working

Hi fellow Mv enthusiasts,

I'll cut straight to the chase, the dashboard of my 2000 f4 750s is not working.

Well not all of it, I have the headlight led, turn signals led, battery led, oil led working (top part) and everything else is off (lower part)

I know that f4s wouldn't turn on without a dashboard wich means the problem maybe is not with the dash itself as I already took it off and took it to replace the fuses and diodes in it and got every single one in it checked and change and it still didn't work when I got it back on.

The battery in this f4 is not stock it has been changed, i got the bike ten days ago and I just thought it could be a battery thing?

Another thing is I took the right fairing off to check wires and found that the red and white wire is attached to some other wire by hand (this has been fixed before, not by me)

I hope you guys could help me about this.
Madstupidmoe is offline  
Sponsored Links
post #2 of 3 (permalink) Old 11-02-2016, 08:36 PM
Donsy's Avatar
Join Date: Aug 2008
Location: Australia
Posts: 22,054
New Site Garage
Not true that F4's can not start without dash connected, but that's slightly irrelevant. Main thing is that you look carefully at the wiring diagram, there's a lot of seperate input going to the dash and coming from ECU and various other inputs. That all or most of them are dead at once is a but unlikely, so I would star looking towards the common connections such as the (-) wires, usually in blue.

Since you've only had the bike for a short while, and you also have a "running" problem, I'd say a bit of maintenance and cleaning of connections would be a good start mate.

Good luck.

Dons Nel
Own - Two F4 1000R's 06 and 07.
PayPal :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Mobile in Australia: 0438 385 776
Website with MV Manuals for Most models -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Donsy is offline  
post #3 of 3 (permalink) Old 11-08-2016, 04:27 PM
New Member
Jay's Avatar
Join Date: Dec 2011
Location: Cambridge UK
Posts: 18
New Site Garage
I feel your pain! I had the same problem on my 750.

The problem was where the cables were routed. On the right hand side a whole bunch of cables were bent under the engine mounting which attaches to the cylinder head. They had a plastic sleeve wrapped around them. A few of the wires in there had got brittle and come apart. Easy fix.

Good luck

Hope this helps you?
Jay is offline  

Quick Reply

Register Now

In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome