A screw ate up my rear hub - MVAgusta.net
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 11 (permalink) Old 04-22-2018, 11:22 AM Thread Starter
Senior Member
 
910BrutaleHydrogen's Avatar
 
Join Date: Mar 2008
Location: Lier
Posts: 980
New Site Garage
A screw ate up my rear hub

After the second ride of the year, a screw spun up my Rear hub. This is a screw that has not been touched since the bike left Varese in 2011.
It first rubbed onto the gasket that held the hub in place. Before continuing on the main part of the rear hub. I also need a new Speed ​​sensor and a rear brake support.
My recommendation is to add a new locktite when you have service on your Rear hub. Had I done this the problem had been avoided. Now I'm sitting with a bill of about $ 900.
Attached Images
     

Brutale 910R Hydrogen
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

And White bullet
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
910BrutaleHydrogen is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 04-22-2018, 11:26 AM
Senior Member
 
number2's Avatar
 
Join Date: Jan 2009
Location: Charleston South Carolina
Posts: 5,539
is the hub the same for all bikes
number2 is online now  
post #3 of 11 (permalink) Old 04-22-2018, 11:27 AM Thread Starter
Senior Member
 
910BrutaleHydrogen's Avatar
 
Join Date: Mar 2008
Location: Lier
Posts: 980
New Site Garage
This is what I expect to replace the original hub with.

https://www.designcorse.com/products...ant=4232029697

Mitch's hub could also be an option. But I expect delivery time will be a bit too long for me.

Brutale 910R Hydrogen
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

And White bullet
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
910BrutaleHydrogen is offline  
Sponsored Links
Advertisement
 
post #4 of 11 (permalink) Old 04-22-2018, 11:32 AM Thread Starter
Senior Member
 
910BrutaleHydrogen's Avatar
 
Join Date: Mar 2008
Location: Lier
Posts: 980
New Site Garage
Quote:
Originally Posted by number2 View Post
is the hub the same for all bikes
I think there is a difference between MY10 hub and the previous ones. But I think they can be used on all bikes. The one who came after 2010 should be a little better quality I think. But the problem I have would not have been avoided regardless of the quality of the hub.

Brutale 910R Hydrogen
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

And White bullet
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
910BrutaleHydrogen is offline  
post #5 of 11 (permalink) Old 04-22-2018, 05:15 PM
MVAgusta.net Sponsor
 
mitchy's Avatar
 
Join Date: Feb 2010
Location: Gold Coast, Australia.
Posts: 4,950
New Site Garage
Send a message via Skype™ to mitchy
The spacer between the sprocket carrier and hub is different on early and late hubs and the bearing set-up also.
My hub will fit all models.I just supply a new spacer for 2010 on models.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Bike- F4 1078.
Work.Email & Paypal.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Work Phone (+61)0755244655
Facebook- Mitch Covington
Mobile-0423041326
mitchy is offline  
post #6 of 11 (permalink) Old 04-22-2018, 07:48 PM
Senior Member
 
number2's Avatar
 
Join Date: Jan 2009
Location: Charleston South Carolina
Posts: 5,539
Quote:
Originally Posted by 910BrutaleHydrogen Norway View Post
I think there is a difference between MY10 hub and the previous ones. But I think they can be used on all bikes. The one who came after 2010 should be a little better quality I think. But the problem I have would not have been avoided regardless of the quality of the hub.
I was asking because if someone has one laying around they might be able to get you one
number2 is online now  
post #7 of 11 (permalink) Old 04-22-2018, 11:19 PM
Senior Member
 
theknurl's Avatar
 
Join Date: Jul 2009
Location: Palos Verdes Est, SoCal, USA
Posts: 13,799
Send a message via Skype™ to theknurl
Thumbs up ?

Quote:
Originally Posted by number2 View Post
I was asking because if someone has one laying around they might be able to get you one
910BrutaleHydrogen;
I have a clean '10 + hub/axle/brake assembly with sensor, I'll keep the brake disc and toss the sprocket (worn some)
to save on postage
PM me, we'll talk
Attached Images
 

Noel-theknurl

The Forum Curmudgeon
I'm not PC either
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

'08 910R
'05 F4
ph. 310-414-7247 PST, GMT -8
PayPal;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Skype; theknurl
theknurl is offline  
post #8 of 11 (permalink) Old 04-23-2018, 12:42 AM Thread Starter
Senior Member
 
910BrutaleHydrogen's Avatar
 
Join Date: Mar 2008
Location: Lier
Posts: 980
New Site Garage
Quote:
Originally Posted by theknurl View Post
910BrutaleHydrogen;
I have a clean '10 + hub/axle/brake assembly with sensor, I'll keep the brake disc and toss the sprocket (worn some)
to save on postage
PM me, we'll talk
This is interesting.

Brutale 910R Hydrogen
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

And White bullet
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
910BrutaleHydrogen is offline  
post #9 of 11 (permalink) Old 04-25-2018, 01:10 PM Thread Starter
Senior Member
 
910BrutaleHydrogen's Avatar
 
Join Date: Mar 2008
Location: Lier
Posts: 980
New Site Garage
Quote:
Originally Posted by theknurl View Post
Quote:
Originally Posted by number2 View Post
I was asking because if someone has one laying around they might be able to get you one
910BrutaleHydrogen;
I have a clean '10 + hub/axle/brake assembly with sensor, I'll keep the brake disc and toss the sprocket (worn some)
to save on postage
PM me, we'll talk
[IMG class=inlineimg]http://www.mvagusta.net/forum/images/MVagusta_net_2016/smilies/tango_face_wink.png[/IMG]
I need a response from you Noel. Season is short. So I have to make a decision on what to buy.

Brutale 910R Hydrogen
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

And White bullet
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
910BrutaleHydrogen is offline  
post #10 of 11 (permalink) Old 04-25-2018, 05:21 PM
Senior Member
 
theknurl's Avatar
 
Join Date: Jul 2009
Location: Palos Verdes Est, SoCal, USA
Posts: 13,799
Send a message via Skype™ to theknurl
Thumbs up ?

Glenn;
$350 + shipping, I won't have that number until it's packaged, won't pack it until you say you want it


Noel-theknurl

The Forum Curmudgeon
I'm not PC either
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

'08 910R
'05 F4
ph. 310-414-7247 PST, GMT -8
PayPal;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Skype; theknurl
theknurl is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome