MV 910S - Need a Swing Arm End Bolt - Part#8000778221 - MVAgusta.net
 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 08-12-2011, 10:57 AM Thread Starter
Established Member
 
MVAbrute910's Avatar
 
Join Date: Jun 2010
Location: Mountain Top, PA
Posts: 113
MV 910S - Need a Swing Arm End Bolt - Part#8000778221

Okay turning to the forum experts to see if I can get lucky and get my bike back up and running.

Took my bike in and my dealer for normal checks and new tires - apparently they found one of the Swing Arm bolts was overtorqued and required to be drilled out to remove it. Sucks However, they said it'd take an hour and non issue so I told them to go ahead and do it. They drill the stupid bolt out before they realized they didn't have the stupid part and needed to order it. Now my bike is out of commission waiting on a stupid bolt that could have waited until they got it in if they had planned this a bit better!!! ARGH!

Does anyone have a Swing arm end bolt. Part#800078221 in the US that can ship to me??? They have no idea when they're going to get this in. No issue paying.

Thanks!!

06 910S Brutale
97 Ducati Monster 750 (sold)
MVAbrute910 is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 08-12-2011, 11:56 AM
New Member
 
Archilla's Avatar
 
Join Date: Dec 2010
Location: Trabuco Canyon, CA
Posts: 23
Bummer. Sounds like a job for CAG. I'd send him a PM to see if he has one.
-Ruben
Archilla is offline  
post #3 of 10 (permalink) Old 08-12-2011, 11:59 AM
Al-
Senior Member
 
Al-'s Avatar
 
Join Date: May 2011
Posts: 1,015
i'm appalled that they'd do that and not consider taking a bolt from a crated or showroom bike in order to get you on the road while they waited for the part to arrive. Does that seem too above and beyond?

2004 F4 SPR F4RR Corsacorta Powered
2006 Brutale 910S
2012 F4 RR
2012 F4 RR
Al- is offline  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 08-12-2011, 12:09 PM
Senior Member
 
Join Date: Jun 2011
Location: Melbourne Australia
Posts: 313
twizel is offline  
post #5 of 10 (permalink) Old 08-12-2011, 12:59 PM Thread Starter
Established Member
 
MVAbrute910's Avatar
 
Join Date: Jun 2010
Location: Mountain Top, PA
Posts: 113
Thanks all for the replies!!

Sent a note to CAG already (did it right after posting!!).

Totally stupid question but are those ebay bolts the same thing - i honestly haven't seen the bolts myself since I found out all of this while traveling on business and was hoping to pick my bike up for this weekend!! Appreciate the recommendation - give CAG a few horus to reply and may jump for those. May do both actually and sell the stupid things to my dealer!!

....and Al, no I don't think that is asking too much. I may try pushing that suggestion!!!

06 910S Brutale
97 Ducati Monster 750 (sold)
MVAbrute910 is offline  
post #6 of 10 (permalink) Old 08-12-2011, 03:56 PM
CAG
Senior Member
 
CAG's Avatar
 
Join Date: Dec 2006
Location: Home. In Dixie.
Posts: 13,695
Send a message via Skype™ to CAG
I've got them. I can send them to you Monday.
CAG is offline  
post #7 of 10 (permalink) Old 08-12-2011, 06:56 PM
Senior Member
 
Join Date: Feb 2006
Location: Fife,Scotland
Posts: 459
If the swingarm bolts were over torqued and required drilling out you best order some hub bearings now also.

You say " My dealer " did the bike come from them ,have they worked on it before ,how did the bolt become overtorqued?

I find it hard to believe they could not remove the bolt unless they buggered the head with a wrong size or an improperly fitted bit.
I presume they managed to break the hub nut loose at + 200nm but then had trouble with one that should be 30nm.

I sympathize with your situation but would be asking questions.
macmivvi is offline  
post #8 of 10 (permalink) Old 08-12-2011, 07:23 PM
Senior Member
 
theknurl's Avatar
 
Join Date: Jul 2009
Location: Palos Verdes Est, SoCal, USA
Posts: 13,886
Send a message via Skype™ to theknurl
Thumbs down over torqued?

Quote:
Originally Posted by macmivvi View Post
If the swingarm bolts were over torqued and required drilling out you best order some hub bearings now also.

I sympathize with your situation but would be asking questions.
+10

MVAbrute910;
some moron at the "dealership" didn't see the label above the bolts????
specing the torque

its only supposed to be 28-32 Nm


Noel-theknurl

The Forum Curmudgeon
I'm not PC either
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

'08 910R
'05 F4
ph. 310-414-7247 PST, GMT -8
PayPal;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Skype; theknurl
theknurl is online now  
post #9 of 10 (permalink) Old 08-12-2011, 07:59 PM Thread Starter
Established Member
 
MVAbrute910's Avatar
 
Join Date: Jun 2010
Location: Mountain Top, PA
Posts: 113
Yep - will be having some discussions. To those that know about the hub bearings....
What impact will this bolt have on the bearings? That was actually what I had asked them to inspect/check out after reading the issues with them on the forum and figured if they were changing the tires and doing some maintenance that made sense to just check them out. Guess I'm glad I did...

Its actually still under warranty but yes - purchased new from this dealer and no idea how this bolt was over torqued unless it was done so by the factory or this dealer (or they rounded off the bolt when trying to pull it and needed new one).

Quote:
Originally Posted by theknurl View Post
+10

MVAbrute910;
some moron at the "dealership" didn't see the label above the bolts????
specing the torque

its only supposed to be 28-32 Nm


06 910S Brutale
97 Ducati Monster 750 (sold)
MVAbrute910 is offline  
post #10 of 10 (permalink) Old 08-12-2011, 09:18 PM
Senior Member
 
theknurl's Avatar
 
Join Date: Jul 2009
Location: Palos Verdes Est, SoCal, USA
Posts: 13,886
Send a message via Skype™ to theknurl
Wink bolt?

MVAbrute910;
the part number is 800078221.....

which bolt was over torqued? left or right? if its the left the bearing MAYBE OK, if its the right the bearing is toast, or dying

if they had put 8 mm bolts in there......a whole lot less would have failed


Noel-theknurl

The Forum Curmudgeon
I'm not PC either
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

'08 910R
'05 F4
ph. 310-414-7247 PST, GMT -8
PayPal;
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Skype; theknurl
theknurl is online now  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome