Peg replacement - MVAgusta.net
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 25 (permalink) Old 03-26-2011, 04:39 PM Thread Starter
Senior Member
 
V10KLZZ71S's Avatar
 
Join Date: Mar 2011
Location: Tennessee Colony,Texas
Posts: 440
Peg replacement

Did a search and came up empty. The stock pegs suck. I looked at some replacements from a vendor here. They have stock appearing and Sato. I am leaning towards Sato. It does not appear they pivot and that is fine with me as long as I dont unload the bike in corners, I doubt I will be draggin pegs. Any suggestions?

07 Brutale' 910R Arrow Thunder, PCIII,Ferracci chip, CRG mirrors,levers. Scotts, Motovation sliders.
O6 Yamaha FZ1
V10KLZZ71S is offline  
Sponsored Links
Advertisement
 
post #2 of 25 (permalink) Old 03-26-2011, 05:58 PM
CAG
Senior Member
 
CAG's Avatar
 
Join Date: Dec 2006
Location: Home. In Dixie.
Posts: 13,695
Send a message via Skype™ to CAG
Satos are pretty nice. Riding house are the prettiest but also the most expensive. Ferracci's are copies of the Sato's and look it. If you like the stock rear sets but just want to replace the begs with something with some grip I have some.

Those are all the rearsets I have experience with.
CAG is offline  
post #3 of 25 (permalink) Old 03-26-2011, 05:59 PM
Senior Member
 
endgrain's Avatar
 
Join Date: Aug 2008
Location: Richmond, VA
Posts: 488
Cheap way
Ducati pegs fit. I got mine from Competition Werkers. I posted it on here a while ago. See post #25 in this link for pictures

http://mvagusta.net/forum/showthread...ndgrain&page=3


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
endgrain is offline  
Sponsored Links
Advertisement
 
post #4 of 25 (permalink) Old 03-26-2011, 06:30 PM
Established Member
 
mshermanator's Avatar
 
Join Date: May 2007
Posts: 100
just get yourself a sharp angled file and make some nice groves in the ball of the footpeg, this makes them much nicer to use

Harden Up

Previous bikes

CB250 NT
VT250 FT
VF500
FJ 1000
R100RS
R1100RS
R1100RT
R1100s
750 Brutale
F4 750 evo3
F4 1000s
S1000rr 2012
S1000rr 2013
mshermanator is offline  
post #5 of 25 (permalink) Old 03-26-2011, 07:32 PM Thread Starter
Senior Member
 
V10KLZZ71S's Avatar
 
Join Date: Mar 2011
Location: Tennessee Colony,Texas
Posts: 440
Thanks guys, hmmmm.......

07 Brutale' 910R Arrow Thunder, PCIII,Ferracci chip, CRG mirrors,levers. Scotts, Motovation sliders.
O6 Yamaha FZ1
V10KLZZ71S is offline  
post #6 of 25 (permalink) Old 03-26-2011, 09:43 PM
Senior Member
 
dmac666's Avatar
 
Join Date: May 2007
Location: Canberra
Posts: 300
Hi V10,

I use Oberon pegs, much better and no more feet slipping off.
dmac666 is offline  
post #7 of 25 (permalink) Old 03-27-2011, 07:06 PM
New Member
 
Join Date: Nov 2005
Posts: 38
I have designed an entire rearset with a new peg for my bike. I was not able to find what I wanted so I decided to try it on my own. I have a rapid prototype version and after a few tweaks I am going to have them machined. The rearsets are offset 35 mm frame to peg mount to align with the exhaust shield. I did this because when riding on the ball of my foot, my heel is pushed out which puts pressure on the inside of my knee. I can send out some photos if you want to see them. My planned finish will match the stock heel guard.
nick5704 is offline  
post #8 of 25 (permalink) Old 03-28-2011, 11:39 AM
Senior Member
 
Cazadore's Avatar
 
Join Date: Jun 2008
Location: Austin, TX
Posts: 494
How about these? They are listed for the 1078 but I am sure they fit all the Brutales.

http://www.motovationusa.com/mvstore...idproduct=1268



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motovation is now on Facebook -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Cazadore is offline  
post #9 of 25 (permalink) Old 03-28-2011, 11:45 AM Thread Starter
Senior Member
 
V10KLZZ71S's Avatar
 
Join Date: Mar 2011
Location: Tennessee Colony,Texas
Posts: 440
I likey!!

07 Brutale' 910R Arrow Thunder, PCIII,Ferracci chip, CRG mirrors,levers. Scotts, Motovation sliders.
O6 Yamaha FZ1
V10KLZZ71S is offline  
post #10 of 25 (permalink) Old 03-28-2011, 03:13 PM
Senior Member
 
MikeF4Black's Avatar
 
Join Date: Mar 2008
Location: Amsterdam
Posts: 3,111
Cool

MV Corse has some nice ones. I had them (black ones) on my F4 1078RR and had them transferred to my Brutale 1078RR.

They look good and they are good.

Nulla tenaci invia est via
MikeF4Black is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome