Where can I get an Engine Stand? - MVAgusta.net
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 10-16-2010, 06:16 PM Thread Starter
Established Member
cnegron's Avatar
Join Date: May 2009
Location: Campbell, CA
Posts: 123
Where can I get an Engine Stand?

Something like this:


OEM is fine but seems bulky, I'm also not sure of cost.

It appears that I have a little oil leaking where the head meets the block and wanted to take it apart and put a new seal. I don't do wood-work at any level and it seems very difficult to support without something properly designed for it.

While I'm at it, is there also a single stand I can use to support the bike and take both wheels off. I've seen the center stand at "redracing" but everyone advices here not to shop there, also would like some feedback on this.

thoughts, experiences?
cnegron is offline  
Sponsored Links
post #2 of 3 (permalink) Old 10-17-2010, 12:39 AM
New Member
Join Date: Dec 2008
Location: Mt Maunganui,New Zealand
Posts: 53
The cylinder base gasket can be replaced without completely removing the engine from the frame by undoing the frame bolts and letting it swing down on the swingarm pivot,I used a rear stand,a small floor jack under the sump and raised the front end from a gantry allowing ample access...I hope this helps
jedforce is offline  
post #3 of 3 (permalink) Old 10-20-2010, 06:42 PM
Established Member
O-mac's Avatar
Join Date: Aug 2010
Location: Dundee, Scotland
Posts: 132
Abba Stand and a trolly Jack will get both wheels off the ground no problem, I have no idea about the engine stand though sorry
O-mac is offline  

Quick Reply

Register Now

In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome