Mv Agusta 675 rea sproket movement - MVAgusta.net
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 06-16-2019, 09:49 AM Thread Starter
New Member
 
Join Date: Dec 2018
Location: Qatar
Posts: 12
Mv Agusta 675 rea sproket movement

Hi all, I hope you guys you can help!
I have not replaced my cush drives rubbers yet, as still struggling to find some one to do it. I have looked into if there was any play in the sprocket and I have attached a video to this post and I hope it will help with any advice able to be given.

I understand that the cush drive rubbers are shot and will cause play in the sprocket when it's turned, but i don't understand why it has side to side play!

I have the two following questions:

1. Does anybody know why the sprocket is moving side to side or could this just be due the rubbers.
2. Also do you know if i can remove the nut on the sprocket side while holding the bike up with a paddock stand on the brake disc side of the wheel. I.e. will it support the bike as the main hub will be fixed still.

Any help would be greatly appreciated.

thanks in advanced!
Attached Images
 
draz is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 06-16-2019, 10:23 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,659
Send a message via Skype™ to silentservice703
The answers to your two questions are 1. Yes, and 2. Yes.

Get your manual here and have a read: Team Double 3 Racing | MV Agusta

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #3 of 5 (permalink) Old 06-16-2019, 01:14 PM
Senior Member
 
PTsalas's Avatar
 
Join Date: Apr 2012
Posts: 1,362
I never thought about putting the paddock stand through the other hole...

I always use foot peg stand for this operation. It's a pain having to mount the foot pegs upside down each time (to prevent them folding when on the stands).
PTsalas is offline  
Sponsored Links
Advertisement
 
post #4 of 5 (permalink) Old 06-16-2019, 06:19 PM
Senior Member
 
Terrys409's Avatar
 
Join Date: Sep 2016
Location: Cartersville, Ga
Posts: 318
New Site Garage
Use a tie down through your wheel to your foot peg instead of the brake. It makes it easier for one person.

Check out the “Grinding” thread or many others. There are hundreds of posts about cush drives and sprocket housing wobble.

Terry_________________________________________
Tecumseh Minibike, SL 70, KE 100, XR250L, KLR650, ST800, XR650L, 525EXC, 450EXC, GS1200R, 2016 TVL 800
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Terrys409 is offline  
post #5 of 5 (permalink) Old 06-17-2019, 04:55 PM
Established Member
 
Fastspy's Avatar
 
Join Date: Mar 2017
Location: Maple Grove, MN
Posts: 171
Some have reported that the axle nut loosens with time and could result in the side to side slop from excessive wear. In addition, there is a service requirement of re-torquing the axle nut based on factory service intervals along with cush rubber dampener replacement. There are several recent threads on the subject that I'm sure you must have read dealing with a similar issue.
Fastspy is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in













Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome