CNC racing indicators. Need help - MVAgusta.net
 7Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 31 (permalink) Old 12-18-2018, 07:35 AM Thread Starter
New Member
 
roscopeeco's Avatar
 
Join Date: Nov 2018
Location: Missouri, soon to be Malaga, Spain
Posts: 38
New Site Garage
CNC racing indicators. Need help

Hello. I am trying to place these in the rear. I purchased two resistors and two plug in adapters. The scheme shows that I need two resistors per light. Does anyone have experience installing these?

Thanks in advance.
roscopeeco is offline  
Sponsored Links
Advertisement
 
post #2 of 31 (permalink) Old 12-18-2018, 07:39 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,802
Send a message via Skype™ to silentservice703
There are several styles of CNC Racing indicators...and there are many models of MV Agusta bikes.

A little help from you in the way of information would help us help you.

Please put your bike model and year in your signature line...wiring diagrams differ.

That being said, you only need the amount of resistance that was originally in the circuit.

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125

Last edited by silentservice703; 12-18-2018 at 08:10 AM.
silentservice703 is offline  
post #3 of 31 (permalink) Old 12-18-2018, 07:54 AM Thread Starter
New Member
 
roscopeeco's Avatar
 
Join Date: Nov 2018
Location: Missouri, soon to be Malaga, Spain
Posts: 38
New Site Garage
I doubt you have the experience I need because wiring these lights is the same process on each bike. The exact model of the indicators makes no difference to wiring either. The only information that is needed is you are replacing a bulb with an LED. I am sure after this response I probably won’t get the help I needed, but this is the way of the forums these days. You have certain people who are “forum police” and want to pick at every little detail.
ceepee likes this.
roscopeeco is offline  
Sponsored Links
Advertisement
 
post #4 of 31 (permalink) Old 12-18-2018, 07:55 AM Thread Starter
New Member
 
roscopeeco's Avatar
 
Join Date: Nov 2018
Location: Missouri, soon to be Malaga, Spain
Posts: 38
New Site Garage
If it helps you to be absolutely thorough with needless info it is a brutale 800rr 2015 and sky cnc indicators.
roscopeeco is offline  
post #5 of 31 (permalink) Old 12-18-2018, 08:02 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,802
Send a message via Skype™ to silentservice703
Excellent way to endear yourself to the forum.

You don't need my help.

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #6 of 31 (permalink) Old 12-18-2018, 08:24 AM
Senior Member
 
Arcimboldo's Avatar
 
Join Date: Jun 2015
Location: West Macronistan
Posts: 375
New Site Garage
Talking

Quote:
Originally Posted by roscopeeco View Post
If it helps you ...
Ach so...


I was going to tell you how to do it on a 2015 TV.
The wiring is peculiar to this M&Y.
Any sleight of hand I could propose would be of no use on a Brutale.

The shop even tried to foist a 2 (TWO) hours bill on me for botching
this supposedly simple job for 1 (ONE) blinker.

See
Telling us it's a Brutale saved you a pile of useless info
that you, maybe, could've done without.

Quote:
... to be absolutely thorough with needless info...
Relevant to your assertion
the workshop manual is precise:
On a Brute 800 rr and the very MY '15
you'll have to change the blinker fluid.

Dragster
Arcimboldo is offline  
post #7 of 31 (permalink) Old 12-18-2018, 08:29 AM
Senior Member
 
Black_Gold_Saw's Avatar
 
Join Date: Jul 2016
Location: Netherlands
Posts: 1,580
New Site Garage
Quote:
Originally Posted by silentservice703 View Post
Excellent way to endear yourself to the forum.

You don't need my help.
Knowing how much help you try to provide to every single member on this forum who has a question about anything.

That made me chuckle

"Mileena"
MV Agusta F3 675 '17 - Matt Avio Grey


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Black_Gold_Saw is online now  
post #8 of 31 (permalink) Old 12-18-2018, 08:50 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,802
Send a message via Skype™ to silentservice703
Thanks for that!

This one falls under "Get to Know Your Audience".

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #9 of 31 (permalink) Old 12-18-2018, 09:59 AM
Senior Member
 
number2's Avatar
 
Join Date: Jan 2009
Location: Charleston South Carolina
Posts: 5,539
Quote:
Originally Posted by roscopeeco View Post
I doubt you have the experience I need because wiring these lights is the same process on each bike. The exact model of the indicators makes no difference to wiring either. The only information that is needed is you are replacing a bulb with an LED. I am sure after this response I probably won’t get the help I needed, but this is the way of the forums these days. You have certain people who are “forum police” and want to pick at every little detail.

Young person, you are posting on one of the friendliest and most informative websites on the internet and definitely the best motorcycle forum. There is more information available here than you could get from the factory. Too say it doesn't make any difference which bike it is or which style indicator it is only shows a lack of knowledge on your part and your attitude shows a total lack of respect.


That said start with one resistor and if it blinks too fast add another.


Oh by the way, welcome to the forum
number2 is offline  
post #10 of 31 (permalink) Old 12-18-2018, 10:59 AM Thread Starter
New Member
 
roscopeeco's Avatar
 
Join Date: Nov 2018
Location: Missouri, soon to be Malaga, Spain
Posts: 38
New Site Garage
I’m specifically looking for someone who has put any replaced any OEM bulb light with a CNC indicator. CNC sells the plug adapter and the resistors. I purchased plug adapters which will fit ANY MV agusta and resistors also sold by CNC. The wiring from the bike that give power to the tail lights are labebeled left and right. Because I have the plug adapters that fit 95% of MV agustas built in the modern era, all I need to know is how to splice and put resistors between plug adaptor and wires coming from the CNC light. Because I bought the correct adapter and correct light for the bike. I am only asking how to put a resistor in this circuit to decrease the load so the lights can actually blink. The CNC lights come with one diagram. One to replace the lights if you don’t need a resistor which is in essence a plug and play and one schematic if you need resistors. Obviously, I need resistors.
roscopeeco is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome