Rear sprocket carrier upgrade? - MVAgusta.net
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 11 (permalink) Old 08-30-2018, 03:10 PM Thread Starter
Established Member
 
llevero's Avatar
 
Join Date: Sep 2016
Location: Las vegas, NV
Posts: 83
New Site Garage
Rear sprocket carrier upgrade?

Now with the 2018 800cc bikes with the new rear sprocket carrier and cush drives update. Would it be possible to swap of the carrier with the new upgraded one? Please see the video below if you have not seen it. It has MV Agusta Mechanical Engineer & Technical Director - Brian Gillen - introduce the Cush Drive System.

https://www.facebook.com/poweredbytu...g5MzY2MDQyNzk/

2016 TVL
Las Vegas NV
llevero is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 08-30-2018, 03:23 PM
New Member
 
Onuro's Avatar
 
Join Date: Dec 2017
Posts: 32
New Site Garage
Yes you can directly use it on the existing TV. There's also an identical aftermarket part available:

chain wheel adaptor Kit - bds-bikeparts
Attached Images
 

Overdose Moto Garage

Last edited by Onuro; 08-30-2018 at 03:26 PM.
Onuro is offline  
The Following User Says Thank You to Onuro For This Useful Post:
post #3 of 11 (permalink) Old 08-31-2018, 05:44 PM Thread Starter
Established Member
 
llevero's Avatar
 
Join Date: Sep 2016
Location: Las vegas, NV
Posts: 83
New Site Garage
Quote:
Originally Posted by Onuro View Post
Yes you can directly use it on the existing TV. There's also an identical aftermarket part available:

chain wheel adaptor Kit - bds-bikeparts
I'm in the US and Shipping would be an arm and a leg.

2016 TVL
Las Vegas NV
llevero is offline  
Sponsored Links
Advertisement
 
post #4 of 11 (permalink) Old 09-02-2018, 10:42 AM
Senior Member
 
MarcSilverTriple's Avatar
 
Join Date: Nov 2016
Location: Isère, France
Posts: 735
New Site Garage
Quote:
Originally Posted by llevero View Post
Now with the 2018 800cc bikes with the new rear sprocket carrier and cush drives update. Would it be possible to swap of the carrier with the new upgraded one? Please see the video below if you have not seen it. It has MV Agusta Mechanical Engineer & Technical Director - Brian Gillen - introduce the Cush Drive System.

https://www.facebook.com/poweredbytu...g5MzY2MDQyNzk/

Looking at the video "the new one doesn't fail"... A change to plan on Euro 3 bikes.

Marc,
Turismo Veloce in France
Ride with us in Vosges :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
MarcSilverTriple is offline  
post #5 of 11 (permalink) Old 09-02-2018, 12:59 PM
whp
Established Member
 
whp's Avatar
 
Join Date: May 2013
Location: Germany, Hessen
Posts: 122
Quote:
Originally Posted by MarcSilverTriple View Post
Looking at the video "the new one doesn't fail"... A change to plan on Euro 3 bikes.
Thats what i thought.. so every old 12-18 Owner was a beta tester for the new one! If the style of the new brutale wouldnt be that bad i would trade my 2015 model!

Life is short....

Kawasaki Zx6r 1999 green 'Sold' 1999-2012
B3 675 2012 white 'SOLD' 2012-2015
B3 800 2015 grey 'NEW' 2015 -
Kawasaki zx6r 1998 green ´old´2016 -

SUBSCRIBE PLS
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
whp is offline  
post #6 of 11 (permalink) Old 09-02-2018, 01:05 PM
Senior Member
 
dansoarr's Avatar
 
Join Date: Oct 2015
Location: Herefordshire / Monmouthshire Border, UK
Posts: 624
Yep, I wonder what the cost would be from MV for an upgrade?

I've just finished the mould to make my own cush drive rubbers from PU. But I figure the MV parts will be expensive if you can get them.

Arron

----------------------------------------
2015 MV F4, ABS
ECU Mapped with ECUstudio
QS & Blipper working with ECUstudio

others
GSXR 1000
GSXR 750
dansoarr is online now  
post #7 of 11 (permalink) Old 09-03-2018, 04:25 AM
Senior Member
 
Bumpkin's Avatar
 
Join Date: Apr 2016
Location: Herefordshire, UK
Posts: 1,611
New Site Garage
Quote:
Originally Posted by dansoarr View Post
But I figure the MV parts will be expensive if you can get them.

For the old style cush drive rubbers? No, not expensive, less than €15 a set the last time I bought a set. Affordable service item every 6,000km or so. My dealer (MotoCorsa) carries them as an off the shelf item as they, like any decent MV dealer should be, are aware that they need replacing regularly.

Chas
Previously a MY16 Turismo Veloce Lusso
Defected to a Ducati Multistrada 1260S Touring

Last edited by Bumpkin; 09-03-2018 at 04:30 AM.
Bumpkin is offline  
post #8 of 11 (permalink) Old 09-03-2018, 04:59 AM
Senior Member
 
dansoarr's Avatar
 
Join Date: Oct 2015
Location: Herefordshire / Monmouthshire Border, UK
Posts: 624
Quote:
Originally Posted by Bumpkin View Post
For the old style cush drive rubbers? No, not expensive, less than €15 a set the last time I bought a set. Affordable service item every 6,000km or so.
The cush rubbers are cheap, 6000 miles? The F4 gets through them a little quicker . Within 2000 miles the slop is noticeable.

Hence the interest in changing the rear arrangement to a better one, or moulding my own that are more like the reliability / durability we get from other manufacturers.


Im assuming getting the new parts from MV (which is what I ment) might be hard and rather expensive.

Arron

----------------------------------------
2015 MV F4, ABS
ECU Mapped with ECUstudio
QS & Blipper working with ECUstudio

others
GSXR 1000
GSXR 750
dansoarr is online now  
post #9 of 11 (permalink) Old 09-03-2018, 05:42 AM
Senior Member
 
Bumpkin's Avatar
 
Join Date: Apr 2016
Location: Herefordshire, UK
Posts: 1,611
New Site Garage
Quote:
Originally Posted by dansoarr View Post
The F4 gets through them a little quicker . Within 2000 miles the slop is noticeable.

Yes, well... noticeable on the TV by 1,000 miles... But getting excessive (subjective) at something like 5,000.


I would be interested in how your DIY moulded rubbers hold up but for me it's a moot point as the TVL gets chopped in tomorrow for a Multistrada

Chas
Previously a MY16 Turismo Veloce Lusso
Defected to a Ducati Multistrada 1260S Touring
Bumpkin is offline  
post #10 of 11 (permalink) Old 09-03-2018, 07:55 AM
Senior Member
 
Join Date: Nov 2014
Location: Germany
Posts: 392
Quote:
Originally Posted by llevero View Post
I'm in the US and Shipping would be an arm and a leg.

if you want I can get you one over there for a more reasonable price - living close to BDS and flying over to US in 2 weeks. Then all the shipping you'd have to pay is for the shipping you want within US


I have one of those sets and the quality is top notch, way better than the MV part on my 14 F3 800

MV F3 800 / 2014 / Quick shift up AND down working
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nephalem is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome