New Sprocket needed - MVAgusta.net
 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 07-06-2016, 01:00 PM Thread Starter
New Member
 
Join Date: Jul 2013
Posts: 6
New Sprocket needed

Need some help here, need to get a front and rear sprocket and chain. Searched the forum but couldn't find the answer I needed. I'm in Canada and want to buy online but no one in Canada has MV specific parts. So basically my question is: can i use a sprocket that is not MV specific, I couldn't find any info online as to the bolt pattern/spacing/dimension on any sprockets so I can't tell if they're compatible or not. The only thing I found is I need the clearance for the holder.

If I am not wording my question correctly I will simply ask: Can I use a sprocket that fits another bike?

Thanks
intenserider is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 07-07-2016, 02:46 AM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 21,018
Send a message via Skype™ to silentservice703
Check with site sponsor Sprocket Center.
If the off-set and splines are correct, tooth count is correct...or adjusted as you wish, and the pitch matches across the board, you should be fine.

There are manufacturers with fitment for MV.

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #3 of 8 (permalink) Old 07-07-2016, 03:12 AM
Moderator
 
Donsy's Avatar
 
Join Date: Aug 2008
Location: Australia
Posts: 22,055
New Site Garage
Question How are you searching brother.

Like Chuck said - go look in the Market place right here on the forum:
http://www.mvagusta.net/forum/forumdisplay.php?f=35

This took me 3 minutes, all forum sponsors, very easy.

https://www.designcorse.com/collecti...-675+mv-agusta

http://www.evolutionbike.it/mvagusta...ts/b3/pbr.html

http://sprocketcenter.com/street-spr...2012-2015.html

Good luck.

PS. How many miles K's have you got on that bike that you need to change all the running gear already ?

Dons Nel
Own - Two F4 1000R's 06 and 07.
PayPal :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

eMial:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Mobile in Australia: 0438 385 776
Website with MV Manuals for Most models -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Donsy is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 07-08-2016, 04:51 PM Thread Starter
New Member
 
Join Date: Jul 2013
Posts: 6
thanks silentservice703 and donsy for the reply. I didn't take the sponsered links into consideration cause as my OP stated, I was looking to get something local. Design Corse and Evolution are in Europe. As for sprocket center, it states that oem is 525 but my bike is 520. The reason I was asking for compatibility is since I am changing my sprockets, I would like to look at upgrading or something more Flashy!!! lol.

I am in Canada so the MV dealers here are pretty useless and so are the local shops since MV is not very popular here. When i ask them, the only response is go with OEM only.

As for my mileage, I have 20000 km on it. It is Canada so the weather here sucks sometimes. I do use it every day rain or shine so I'm not surprised that the chain is already worn. I want to change the sprockets as a precaution.

My next step I guess is to call MV USA and get some info off them.

Thanks again
intenserider is offline  
post #5 of 8 (permalink) Old 07-08-2016, 04:56 PM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 21,018
Send a message via Skype™ to silentservice703
So, you say you want to go FLASHY:

You can spend over $2K USD to get something like this:

Name:  DSC_2807r.jpg
Views: 100
Size:  691.7 KB

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #6 of 8 (permalink) Old 07-08-2016, 05:57 PM Thread Starter
New Member
 
Join Date: Jul 2013
Posts: 6
nevermind the driveline, that looks like a whole new swingarm lol
intenserider is offline  
post #7 of 8 (permalink) Old 07-08-2016, 09:58 PM
New Member
 
Join Date: Sep 2015
Posts: 36
I'm also in Canada but I used the Sprocket Center for my 520 conversion, however local shops would also have been able to get me parts. If your shops can't figure out what fits you could do the homework for them. Find what you want online and copy the brand & part numbers down, then ask your shop if they can get those parts.
Blitzen is offline  
post #8 of 8 (permalink) Old 07-09-2016, 12:07 AM
Moderator
 
Donsy's Avatar
 
Join Date: Aug 2008
Location: Australia
Posts: 22,055
New Site Garage
Insiderider, Canada must be the smallest MV community outside of Madagascar, so if you insist on buying local that's fine, I merely pointed you towards the Market place on the forum because 9 times out of 10 those guys will know more than your local dealer, and have more options if you care to email them.
At the end of the day it's your money and your choice, good luck mate.

Dons Nel
Own - Two F4 1000R's 06 and 07.
PayPal :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

eMial:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Mobile in Australia: 0438 385 776
Website with MV Manuals for Most models -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Donsy is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome