BREMBO Rear Caliper? - MVAgusta.net
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 21 (permalink) Old 06-16-2007, 02:23 AM Thread Starter
Senior Member
 
mv2envy's Avatar
 
Join Date: May 2007
Location: Reseda, California
Posts: 5,824
BREMBO Rear Caliper?

hey guys, does anyone know if a brembo rear brake caliper off of any single sided swing armed ducati would be a direct fit to our F4's? if anyone here has a duc and a f4 would you mind measuring the bolt spacing center to center on both calipers to see if they are the same? because i can get a brembo caliper off of a duc from ebay for about $50, not a bad upgrade if u ask me, for the price.
mv2envy is offline  
Sponsored Links
Advertisement
 
post #2 of 21 (permalink) Old 06-16-2007, 04:11 AM
Senior Member
 
altoon's Avatar
 
Join Date: Dec 2005
Location: Irvine, CA
Posts: 1,473
Send a message via Yahoo to altoon
there's a rear brake on the F4?!! haha.

for $50, maybe you can just get it and then pull the one of the F4 and compare 'em. if it's not a fit, you can probably resell it for $50.

just an idea.

alex
altoon is offline  
post #3 of 21 (permalink) Old 06-16-2007, 08:46 AM Thread Starter
Senior Member
 
mv2envy's Avatar
 
Join Date: May 2007
Location: Reseda, California
Posts: 5,824
nahh, dont want to wast the money if its not going to fit. but would be pretty nice if a member here had a sssa duc and they could measure the bolts. im sure other members would upgrade too.
mv2envy is offline  
post #4 of 21 (permalink) Old 06-18-2007, 01:05 AM
Senior Member
 
MADRIDF4R's Avatar
 
Join Date: Feb 2007
Location: Madrid-Spain
Posts: 276
Well, I would like to improve the rear brake too. I think the stock one is useless.

Anyone knows if does exist a brembo rear caliper? And were can I buy it?
MADRIDF4R is offline  
post #5 of 21 (permalink) Old 06-18-2007, 04:08 AM
Senior Member
 
eMoto UK's Avatar
 
Join Date: Apr 2006
Location: UK
Posts: 785
The BREMBO rear caliper will not fit to the exisiting mounts, Moto Corse developed a few one of kits in the past however as they were produced in a very small quantity the price was about 4000 USD for the kit.
eMoto UK is offline  
post #6 of 21 (permalink) Old 06-18-2007, 06:51 AM
Senior Member
 
MADRIDF4R's Avatar
 
Join Date: Feb 2007
Location: Madrid-Spain
Posts: 276
Quote:
Originally Posted by eMoto UK
The BREMBO rear caliper will not fit to the exisiting mounts, Moto Corse developed a few one of kits in the past however as they were produced in a very small quantity the price was about 4000 USD for the kit.
Ok thanks.

I will try to accustom myself to the stock behaviour. It´s cheaper.
MADRIDF4R is offline  
post #7 of 21 (permalink) Old 06-18-2007, 07:18 AM
Senior Member
 
lewdog998's Avatar
 
Join Date: Apr 2006
Posts: 1,536
the rear brembo caliper on my 998 (and all 916-996) are pices of crap anyways....plus they are hard too bleed....you have to tkae it off the mount, turn it right side up above the master to do it properly.....I dont even bother anymore, unless there is a track day tech inspection coming up.....it is basicaly for looks.
So now I dont even look for the rear on the f4...one less thing to worry about.

A gun is not a weapon. It's a tool, like a butcher's knife, or a harpoon, or an alligator.
lewdog998 is offline  
post #8 of 21 (permalink) Old 06-18-2007, 03:04 PM
New Member
 
Join Date: Aug 2006
Location: cheshire united kingdom
Posts: 66
Quote:
Originally Posted by eMoto UK
The BREMBO rear caliper will not fit to the exisiting mounts, Moto Corse developed a few one of kits in the past however as they were produced in a very small quantity the price was about 4000 USD for the kit.
One off motocorse mount with brembo race caliper on my f4
Attached Images
 
ste a is offline  
post #9 of 21 (permalink) Old 06-18-2007, 03:54 PM
Established Member
 
Join Date: Jun 2007
Location: birmingham
Posts: 78
my rear brake is rubbish aswell, thank god its not just my bike, yippee for something
imnoteasy is offline  
post #10 of 21 (permalink) Old 06-18-2007, 06:34 PM
MV Cellist
 
odonata's Avatar
 
Join Date: Dec 2005
Location: Culver City, CA. USA
Posts: 4,593
Send a message via Yahoo to odonata Send a message via Skype™ to odonata
Quote:
Originally Posted by eMoto UK
The BREMBO rear caliper will not fit to the exisiting mounts, Moto Corse developed a few one of kits in the past however as they were produced in a very small quantity the price was about 4000 USD for the kit.
$4000?

O D O N A T A




To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
odonata is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome