Help needed: F4 750 MV logo size - MVAgusta.net
 7Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 14 (permalink) Old 09-29-2018, 11:06 AM Thread Starter
New Member
 
Join Date: Jul 2018
Location: Northumberland, UK
Posts: 53
Help needed: F4 750 MV logo size

I'm having the nose and tail sections of my 2000 F4 750 resprayed, and so need to replace the MV logos.
These are no longer available, says my dealer in the UK.
I'm having difficulty in sourcing aftermarket logos for the nose and tail because the sizes on sale don't match mine.
Would someone measure their MV Agusta logos on the nose fairing and tail section, and tell me the correct OEM width/height.
(My current size: 72mm X 47mm)

Please lots.

F4 750S 2000
Ibgarrow is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 09-29-2018, 11:58 AM
Senior Member
 
dudman's Avatar
 
Join Date: Apr 2013
Location: Cirencester, UK
Posts: 518
https://shop.startwintrading.com/en/...ng-assembly-78

Item no.9 for the nose decal

I have ordered decals for F4 312r with no issues from starwtwin
dudman is offline  
The Following User Says Thank You to dudman For This Useful Post:
post #3 of 14 (permalink) Old 09-29-2018, 01:27 PM
Established Member
 
ViggenF4's Avatar
 
Join Date: Aug 2018
Location: Eastern Finland
Posts: 205
If you dont get the oem ones, theres seller called Samarin on Ebay selling replicas.
ViggenF4 is online now  
The Following User Says Thank You to ViggenF4 For This Useful Post:
post #4 of 14 (permalink) Old 09-29-2018, 01:28 PM Thread Starter
New Member
 
Join Date: Jul 2018
Location: Northumberland, UK
Posts: 53
I've received some, but am unsure whether these are correct. Also Startwin p&p make theirs unattractive! Are there differences between varieties if F4?

F4 750S 2000
Ibgarrow is offline  
post #5 of 14 (permalink) Old 09-29-2018, 01:51 PM
Senior Member
 
nigelrb's Avatar
 
Join Date: Jan 2018
Location: Worcester, England
Posts: 1,667
Send a message via AIM to nigelrb Send a message via Skype™ to nigelrb
I've purchased decals from https://www.bennettsmotorcycles.co.uk/ whose postage is reasonable. Measured my 2007 F4 1000 but it seems they're much larger. Perhaps you could look at the 'post your F4s here' thread, find some 750s and scale up the logos to be sure you're on the right track.

2007 MV F4 1000R
2018 CBR1000RR SP2 : 2011 CBR1000RR : 2004 CBR1000RR : 2003 CBR954RR : 2001 CBR929RR (Erion Racing Edition)
1985 Honda VF1000R : 1985 Honda NS400R
nigelrb is offline  
The Following User Says Thank You to nigelrb For This Useful Post:
post #6 of 14 (permalink) Old 09-29-2018, 02:28 PM
Senior Member
 
Join Date: Oct 2010
Location: ELY, CAMB'S UK
Posts: 851
I order parts for my F4 here from http://www.motocorsa.co.uk/: https://www.bike-parts-mv.com/mvagusta-motorcycle/F4 It is set up similar to Startwin. You just hover the mouse over the item number and it tells you the price and if you can put them in your basket they are in stock.

Very easy to use website.
To be more precise about your order they ask for the vehicle Vin no from your Vehicle Reg Document.
nigelrb likes this.
MVBERT is offline  
The Following User Says Thank You to MVBERT For This Useful Post:
post #7 of 14 (permalink) Old 09-29-2018, 02:40 PM Thread Starter
New Member
 
Join Date: Jul 2018
Location: Northumberland, UK
Posts: 53
Thanks to all of you who've given me purchasing options.
Thing is, I have some aftermarket logos which are small - 50mm X 30mm
Those currently on are 72mm X 47mm
I don't know whether the latter are OEM or not.
I just hoped someone with a stock 750 would be able to tell me the size of theirs.
Then I'd know whether the aftermarket ones were correct - fit them, or not - return them, and source some different ones.
Bennetts say they're no longer available
Startwin and bike-parts items will cost me 30-odd!
Still hoping for an idea of size.

F4 750S 2000
Ibgarrow is offline  
post #8 of 14 (permalink) Old 09-29-2018, 02:54 PM
Old Wing Nut
 
esq'z me's Avatar
 
Join Date: Aug 2007
Location: Marietta, GA
Posts: 17,453
Send a message via Skype™ to esq'z me
On the nose cone of my 2004 SPR they are 42 x 32

There are none on the tail.

But this is a SPR, so probably different from a normal F4
Ibgarrow likes this.

I used to be fast....now I just dream about it.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

'08 910R (Gina), '04 F4 SPR #275 Track Bike (Lola), YSR50 (The Rabbit), '71 CB100 (Lil' Red), '75 RD350C (Orange Bird) restoration project, '08 TT-R110 (Buster) Pam's ride, 2015 Indian Chieftain (Rita) my "low-n-slow", '70 Suzuki F50 (Baby Blue), 2018 Suzuki GSX-S750L8 (Susie Q)
esq'z me is offline  
The Following User Says Thank You to esq'z me For This Useful Post:
post #9 of 14 (permalink) Old 09-29-2018, 03:01 PM
Senior Member
 
silentservice703's Avatar
 
Join Date: Feb 2008
Location: Duxbury, MA, USA
Posts: 20,524
Send a message via Skype™ to silentservice703
I have an EV 03 nose in my garage. I’ll check tomorrow for size if you remind me
Ibgarrow likes this.

Gapalicious 2019 at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
from OCTOBER 2-6, 2019

Call (423) 519-2000 or (423) 253-6213 to reserve your Riverfront Cabin. PM me for The Crow's Nest reservation!!!

Email/Paypal:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


My personal Cell Phone: (781) 223-3020


'07 F4 312R, '10 B4 1090RR, '15 B3 800RR
'07 Ducati Monster S4Rs, '07 Ducati Monster 695
2010 Harley Davidson Ultra-Classic Electra-glide CVO FLHTCUSEBLK
'63 Honda C100A Cub
'61 MVA TRA 125
silentservice703 is offline  
post #10 of 14 (permalink) Old 09-29-2018, 03:53 PM
Senior Member
 
Join Date: Oct 2010
Location: ELY, CAMB'S UK
Posts: 851
Quote:
Originally Posted by Ibgarrow View Post
Thanks to all of you who've given me purchasing options.
Thing is, I have some aftermarket logos which are small - 50mm X 30mm
Those currently on are 72mm X 47mm
I don't know whether the latter are OEM or not.
I just hoped someone with a stock 750 would be able to tell me the size of theirs.
Then I'd know whether the aftermarket ones were correct - fit them, or not - return them, and source some different ones.
Bennetts say they're no longer available
Startwin and bike-parts items will cost me 30-odd!
Still hoping for an idea of size.
I have OEM Graphics, they are 50mm wide and 35mm high for my MV F4 750 2000 model 1+1 Red/Silver paint scheme. They are the same on the front as the one on the rear.
nigelrb and Ibgarrow like this.
MVBERT is offline  
The Following User Says Thank You to MVBERT For This Useful Post:
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome