Problem on the display panel - MVAgusta.net
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 23 (permalink) Old 09-30-2014, 02:28 PM Thread Starter
New Member
 
rthome's Avatar
 
Join Date: Sep 2014
Location: Brasil
Posts: 15
New Site Garage
Send a message via Skype™ to rthome
Unhappy Problem on the display panel

Hello;
First I apologize for any errors of agreement, because I'm using the google translator to write.

I searched the forum and found no similar problem with mine.
I have a MV F4 1000 R 2012 out of warranty,
The panel of my bike half right with the LCD is almost out, you can still see, but if you put in "night mode" shows nothing more.
I talked to a dealership and told me that it does not have concert and should be made to return.
Does anyone have any solution for my problem? Or just changing?
Thank you ...
Attached Images
     
rthome is offline  
Sponsored Links
Advertisement
 
post #2 of 23 (permalink) Old 09-30-2014, 09:08 PM
Senior Member
 
BSR-1's Avatar
 
Join Date: Mar 2013
Location: Capo Beach, Ca, US
Posts: 932
Looks like you need a new one. I don't think you can fix that.

2018 Husky 701 Supermoto
2018 Aprilia Tuono 1100
BSR-1 is offline  
post #3 of 23 (permalink) Old 09-30-2014, 09:39 PM Thread Starter
New Member
 
rthome's Avatar
 
Join Date: Sep 2014
Location: Brasil
Posts: 15
New Site Garage
Send a message via Skype™ to rthome
Quote:
Originally Posted by BSR-1 View Post
Looks like you need a new one. I don't think you can fix that.
This was my fear
rthome is offline  
Sponsored Links
Advertisement
 
post #4 of 23 (permalink) Old 10-03-2014, 03:41 AM
Senior Member
 
PTsalas's Avatar
 
Join Date: Apr 2012
Posts: 1,416
Is it melted on the top right corner? You didn't park it funny in the sun?
PTsalas is offline  
post #5 of 23 (permalink) Old 10-03-2014, 07:33 AM Thread Starter
New Member
 
rthome's Avatar
 
Join Date: Sep 2014
Location: Brasil
Posts: 15
New Site Garage
Send a message via Skype™ to rthome
Quote:
Originally Posted by PTsalas View Post
Is it melted on the top right corner? You didn't park it funny in the sun?
It is not melted, is dust! To remove, simply open the panel and move cotton, that have yet to do.
rthome is offline  
post #6 of 23 (permalink) Old 10-18-2014, 02:26 AM
Established Member
 
WFOF4Pilot's Avatar
 
Join Date: May 2014
Posts: 229
Quote:
Originally Posted by rthome View Post
It is not melted, is dust! To remove, simply open the panel and move cotton, that have yet to do.
I 2nd that; you need to pull the display from the system / disassembly it / clean - remove the dust above and below the display and reassembly it.
Plug it back in and that should resolve your issue. -Davis
WFOF4Pilot is offline  
post #7 of 23 (permalink) Old 10-19-2014, 12:51 AM
Banned
 
Join Date: Sep 2013
Posts: 676
Not dust. Deliniation too sharp. It might be that unplugging the unit and plugging it back in would help, but I suspect it's a cold solder joint internal to the display.
Dana Kincaid is offline  
post #8 of 23 (permalink) Old 10-20-2014, 06:19 AM
New Member
 
Join Date: Nov 2011
Posts: 8
Just to tag on to this thread, i have been having issues with my dashboard display flickering due to revs/vibration and was wondering if anyone has encountered it before. Bike is a late 2010 F4.

The blue backlight is steady all the time and the lcd "blocks" (rpm/icons/speed/temp/everything) are fine at idle, but once the revs/vibrations go up the "blocks" starts to flicker like static. I can make it flicker if i rev it hard enough in neutral, but it is most noticable once moving. Sometimes randomly it's fine for awhile before it starts flickering again.

Has anyone encountered this issue before?
raffie is offline  
post #9 of 23 (permalink) Old 10-20-2014, 07:14 AM Thread Starter
New Member
 
rthome's Avatar
 
Join Date: Sep 2014
Location: Brasil
Posts: 15
New Site Garage
Send a message via Skype™ to rthome
Thank you Davis;
Try to make it when I can buy a new display if I do something wrong I will have to replace one!
As the dirt that is on the right side, that does not worry me, what I want is to fix the panel that is weak from the middle to the right.
Thank you!

Raffie;
In my problem, the panel started flashing until the way it is now, regardless of rotation, it stays that way! I believe your problem would only barely touch!
hugs

Last edited by rthome; 10-20-2014 at 07:16 AM.
rthome is offline  
post #10 of 23 (permalink) Old 10-20-2014, 10:29 PM
New Member
 
Join Date: Nov 2011
Posts: 8
Quote:
Originally Posted by rthome View Post
Raffie;
In my problem, the panel started flashing until the way it is now, regardless of rotation, it stays that way! I believe your problem would only barely touch!
hugs
Ah well i'm going to be bringing it in to get all the wiring and connections checked, but in a worst-case scenario does anyone know if replacing the dashboard is going to be a complicated issue (immobilizers etc) or if it's just plug and play?
raffie is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to use all of the features of the MVAgusta.net site, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome