[SpainF4]

Please, does anyone know the step chain F4MY10?
The manual isn't or I can find.
In the crown not seen him.
I bought a Pirelli Slik 200-60 for the next track.
And shorten developments have advised me, in this case a pinion least, but I need to know the step chain and can not find it anywhere.
Does anyone know?
Thanks

Posting using Tapatalk

Sent from my Samsung using Tapatalk

[Donsy]

Whaaat, mate, your translation was way wrong this time.

[SpainF4]

Originally Posted by Donsy

Whaaat, mate, your translation was way wrong this time.

Jaja..sorry Dons,I knew t is a technical word .. In Spanish PASO DE CADENA.Normally for street 525 and circuit 520.
I need know "step chain" original for F4MY10.
Sorryyy I can't traslate better this time.

[JDS]

Jorge

The chain pitch on the 2010+ F4 1000's is 525.. It is stamped on the chain links..

You can fit a 520 pitch chain but this will mean replacing both sprockets..

I prefer to use DID's chains, but there are plenty of other good alternatives..

.

[SpainF4]

Originally Posted by JDS

Jorge

The chain pitch on the 2010+ F4 1000's is 525.. It is stamped on the chain links..

You can fit a 520 pitch chain but this will mean replacing both sprockets..

I prefer to use DID's chains, but there are plenty of other good alternatives..

.

Thankssss
"It is stamped on the chain links.."
Where..in chain ? I've couldn!t see it.


Sent from my Samsung using Tapatalk

[JDS]

Jorge

Most MV's come fitted with DID chains as standard OEM fitment..

If you look of the side plates of the chain links you'll see the DID logo stamped into the plate and on some of the other links should be stamped the chain pitch type..

.

[theknurl]

Sorry Jorge i didn't see this till now
paso de cadena
literally step of chain

in English 'pitch of the chain'

chain pitch is in 1/8 ths of an inch (sorry no sillimeters)

so 5xx chain is 5/8" pitch
the width is in 1/8 ths too 525 is 2 1/2 1/8ths or 5/16"
520 is 2, 1/8 ths or 1/4"

John;
here Italian bikes come with Regina Extra

[SpainF4]

Originally Posted by JDS

Jorge

Most MV's come fitted with DID chains as standard OEM fitment..

If you look of the side plates of the chain links you'll see the DID logo stamped into the plate and on some of the other links should be stamped the chain pitch type..

.

Originally Posted by theknurl

Sorry Jorge i didn't see this till now
paso de cadena
literally step of chain

in English 'pitch of the chain'

chain pitch is in 1/8 ths of an inch (sorry no sillimeters)

so 5xx chain is 5/8" pitch
the width is in 1/8 ths too 525 is 2 1/2 1/8ths or 5/16"
520 is 2, 1/8 ths or 1/4"

John;
here Italian bikes come with Regina Extra

OK OK :Pitch of the chain 525

Dear DJS: I've been cleaning the chain, I have been studying the chain, link by link,I promise you, I haven't seen anything, only put:
Regina ZRPK
Noel, thanks for your complet info.

[theknurl]

Jorge;
de nada

my friend

[SpainF4]

Originally Posted by theknurl

Jorge;
de nada

my friend

Jaja Noel.
If you speak spanish would be a dream for me.
Technical language is complicated.

Sent from my Samsung using Tapatalk