Mv 250Raid

Eric S · 07-03-2012, 03:59 PM

I am now building on the '59er MV 250Raid,which I have bought in pieces.
Does somebody have a electrical wire routing of it or knows where to find it?

Dorian · 07-03-2012, 05:08 PM

Hi Eric.

I can copy the wiring diagram from the owners handbook if you get stuck. It will be a couple of days though as i'm not at home at present.

Cheers.

Dorian.

Or even better you could look here http://www.mvagusta.net/forum/attach...1&d=1263115905

Eric S · 07-04-2012, 12:08 PM

Thanks Dorian,that's what I need

Eric S · 07-10-2012, 11:45 AM

And has somebody have a complete new connecting rod for me

Dorian · 07-12-2012, 11:51 AM

Eric.

Very hard to find. Try the UK Club Spares guys, but i doubt if they have a new one.

It is very common to get them repaired. The big end can be sleeved and a new crank pin made if required.

Dorian.

Rod Tungsten · 07-14-2012, 05:47 AM

Dorian,

Yes, I am afraid we don't have a rod, but as you say, repairs can be made if he rod is salvagable.

Jerry A (UK MV Spares)

Eric S · 07-15-2012, 05:51 AM

what can be done with the old rod?
some bungler had made a new bigend bearing in it with some shims,bushings and loctite.
I have taken that stuff out of the rod and throwed it on the scrapheap.
Maybe I can re-use the old rod,if there are oversized bearings available.
With the spareparts I got with the bike there was a new bigend pin that I can use

Eric S · 09-20-2012, 04:16 PM

I am still looking for a connecting rod for the Raid
Does anyone know anything?

voerman · 09-22-2012, 04:38 AM

To Eric,

I may still have a used complete crank ( with the rod)
mail me private, you may come along and chose
voerman@glo.be

rgds
gerard

vasco sousa · 10-02-2012, 05:48 PM

I am now in the final process of building on the 1957 MV 250Raid,which I inherited from my uncle.
Does somebody have side covers, frontlight ears support and front mudguard support or knows where to find it?

07-03-2012, 03:59 PM	#1
Eric S Senior Member MV in the Registry: [Liberty] [Ottantatre (83)] Join Date: Jan 2010 Location: The Netherlands Posts: 59	Mv 250Raid I am now building on the '59er MV 250Raid,which I have bought in pieces. Does somebody have a electrical wire routing of it or knows where to find it?

07-03-2012, 05:08 PM	#2
Dorian Senior Member MV in the Registry: [125 Sport] [250 Twin] [150 Turismo/Sport/Supersport] [750 S America] [125 TEL] [Tevere 235] [350 Sport] [125 Motore Lungo] [48 moped] [175 C*/Squalo Series] [600] [48 moped] [View photo album] Join Date: Jan 2010 Posts: 569	Hi Eric. I can copy the wiring diagram from the owners handbook if you get stuck. It will be a couple of days though as i'm not at home at present. Cheers. Dorian. Or even better you could look here http://www.mvagusta.net/forum/attach...1&d=1263115905 Last edited by Dorian : 07-03-2012 at 05:12 PM.

09-22-2012, 04:38 AM	#9
voerman New Member MV in the Registry: [350 S Ipotesi] [350 Sport Elettronica] [250 Twin] [175 C/Squalo Series] [125 GT/GTL] [125 Sport] [125 TR Series] [125 TR* Series] Join Date: May 2010 Location: antwerp belgium Posts: 18	mv 250 RAID To Eric, I may still have a used complete crank ( with the rod) mail me private, you may come along and chose voerman@glo.be rgds gerard

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
MVAgusta.net Advertisement

07-04-2012, 12:08 PM	#3
Eric S Senior Member MV in the Registry: [Liberty] [Ottantatre (83)] Join Date: Jan 2010 Location: The Netherlands Posts: 59	Thanks Dorian,that's what I need

07-10-2012, 11:45 AM	#4
Eric S Senior Member MV in the Registry: [Liberty] [Ottantatre (83)] Join Date: Jan 2010 Location: The Netherlands Posts: 59	And has somebody have a complete new connecting rod for me

07-12-2012, 11:51 AM	#5
Dorian Senior Member MV in the Registry: [125 Sport] [250 Twin] [150 Turismo/Sport/Supersport] [750 S America] [125 TEL] [Tevere 235] [350 Sport] [125 Motore Lungo] [48 moped] [175 C*/Squalo Series] [600] [48 moped] [View photo album] Join Date: Jan 2010 Posts: 569	Eric. Very hard to find. Try the UK Club Spares guys, but i doubt if they have a new one. It is very common to get them repaired. The big end can be sleeved and a new crank pin made if required. Dorian.

07-14-2012, 05:47 AM	#6
Rod Tungsten New Member No MVs in the Registry Join Date: Mar 2012 Posts: 11	Dorian, Yes, I am afraid we don't have a rod, but as you say, repairs can be made if he rod is salvagable. Jerry A (UK MV Spares)

07-15-2012, 05:51 AM	#7
Eric S Senior Member MV in the Registry: [Liberty] [Ottantatre (83)] Join Date: Jan 2010 Location: The Netherlands Posts: 59	what can be done with the old rod? some bungler had made a new bigend bearing in it with some shims,bushings and loctite. I have taken that stuff out of the rod and throwed it on the scrapheap. Maybe I can re-use the old rod,if there are oversized bearings available. With the spareparts I got with the bike there was a new bigend pin that I can use

09-20-2012, 04:16 PM	#8
Eric S Senior Member MV in the Registry: [Liberty] [Ottantatre (83)] Join Date: Jan 2010 Location: The Netherlands Posts: 59	I am still looking for a connecting rod for the Raid Does anyone know anything?

10-02-2012, 05:48 PM	#10
vasco sousa New Member MV in the Registry: [250 Raid] Join Date: Jan 2011 Posts: 1	I am now in the final process of building on the 1957 MV 250Raid,which I inherited from my uncle. Does somebody have side covers, frontlight ears support and front mudguard support or knows where to find it?