Hey all,
I've been lurking on this forum for a while and have found the wealth of information here extremely helpful.
I've recently picked up an '06 Brutale 750, and the last thousand miles have been both extremely fun and a little frustrating. Since I've owned the bike I've:
-Changed the Water Pump Impeller
-Installed a Muzzy Fan
-Installed Rizoma handle bars w/ bar end mirrors and Motovation bar ends
-Installed Brembo RCS Brake and Clutch Master Cylinders
-Motovation Frame, Axle and Fork Sliders
-Rizoma Action Turn signals/Tail tidy
The bike came with an Arrow Mid pipe and recently got a new ECU (due to a turn signal issue).
I was initially on the fence about the bike, but since I've set up the suspension and changed the bars I'm in love.
I live in NYC and have a great mechanic (although he's a Ducati specialist) and am approaching my 3800 mile service. I've also had some issues with my throttle and fueling. Aside from the regular twitchiness the twist grip has some non cable related slop. That combined with some "flat" spots in my rev range (specifically between 3-4k and 7-8k) can be pretty unsettling.
All signs seem to point to PC3 and Dyno, and I was just wondering if anyone knew someone good in the city? Also wondering if anyone had some insight in the the throttle issue. Maybe the cam is worn? Haven't had time to take it apart and look.
I had been thinking Ferracci, but it's cold, and I'd rather not trailer the bike down there.
Thanks again for all the info, hope to hear from you guys soon.
Nate
I've been lurking on this forum for a while and have found the wealth of information here extremely helpful.
I've recently picked up an '06 Brutale 750, and the last thousand miles have been both extremely fun and a little frustrating. Since I've owned the bike I've:
-Changed the Water Pump Impeller
-Installed a Muzzy Fan
-Installed Rizoma handle bars w/ bar end mirrors and Motovation bar ends
-Installed Brembo RCS Brake and Clutch Master Cylinders
-Motovation Frame, Axle and Fork Sliders
-Rizoma Action Turn signals/Tail tidy
The bike came with an Arrow Mid pipe and recently got a new ECU (due to a turn signal issue).
I was initially on the fence about the bike, but since I've set up the suspension and changed the bars I'm in love.
I live in NYC and have a great mechanic (although he's a Ducati specialist) and am approaching my 3800 mile service. I've also had some issues with my throttle and fueling. Aside from the regular twitchiness the twist grip has some non cable related slop. That combined with some "flat" spots in my rev range (specifically between 3-4k and 7-8k) can be pretty unsettling.
All signs seem to point to PC3 and Dyno, and I was just wondering if anyone knew someone good in the city? Also wondering if anyone had some insight in the the throttle issue. Maybe the cam is worn? Haven't had time to take it apart and look.
I had been thinking Ferracci, but it's cold, and I'd rather not trailer the bike down there.
Thanks again for all the info, hope to hear from you guys soon.
Nate