[RobP]

We all know getting parts and tuning for these forks is no where near as easy as any of the other top brands. It would be nice to put together a resource thread which will list vendors and tuners in one place. So if you have had any kind of tuning done to your Marzocchi forks list it here. A useful format would be:

Your Country
What was your complaint (i.e. what were you looking to correct)
Who did the work
Where did you buy parts (vendor)
How satisfied were you with the results

[jchaplin4]

USA
Leaking seals, bad set up.
35 Motorsports in Mooresville, IN
MCC in Chicago, IL
Amazing, transformed the bike.

[Sagerider]

I have not had my MV forks done yet but I am sure that Dan Kyle Racing out of California can handle them just fine. I have done a lot of business with these guys with my Ducatis and they are a very good and reliable bunch.
Another good source would be Dave Moss with Catalyst Reaction Suspension. To find him just google Dave Moss, yes he is that famous.

[JDS]

.
UK

Installation of Radial bottom conversion, renew 1 x fork stanction, Nitride fork tubes, & full service.

K-Tech Suspension
Units 1 & 2
Marquis Court
Rawdon Business Park
Moira
Derbyshire
DE12 6EJ
ENGLAND

Telephone: 01283 559000
Fax: 01283 480746
Email: enquiries@k-tech.uk.com

100% Pleased with work carried out.. K-Tech are also Ohlin service agents.

.

[MvMerito]

Likewise John, iv used Ktech 3 times now, all different bikes and all to set up or service Ohlins etc & once to nitride forks, perfect service & work every time

[chriswatts312]

Originally Posted by jchaplin4

USA
Leaking seals, bad set up.
35 Motorsports in Mooresville, IN
MCC in Chicago, IL
Amazing, transformed the bike.

i have mine rebuilt at maxton in the uk. due to crap set-up and continual leaking ..is there a trend ....since the rebuild no problems and the re-valve has transformed the handling.

[wa2fst]

USA
Superbike Suspension http://www.superbikeitalia.com/
for the track,,trackside.

Marzocchi USA, CA.
leaking fork seal bought and replaced on my own.

I called Dan Kyle about my MV I got the "we have nothing to go inside your 800mm front forks."

[simcity]

Dan can sell you some pretty nice Ohlins to replace the 'zocchi's

[JDS]

.
Al at Design Corse also has some pretty trick fork internal kits for the RAC 50's Marzocchi..



.

[adecritten]

Originally Posted by JDS

.
Al at Design Corse also has some pretty trick fork internal kits for the RAC 50's Marzocchi..



.

FWIW these are the people that supply the springs to both Maxton and K-Tech. Faulkner's will wind the springs you specifically require for your weight 'and /or' specific requirement.

http://dfaulknersprings.com/

Great people to deal with too.