fuel pump wiring

theknurl · 03-22-2012, 06:22 PM

'04-'09 Brutale and F4

on the pumps, 3 checked

#1 red
#2 black
#3 orange
#4 white

on 2 harnesses checked

#1 green/black
#2 blue
#3 purple/white
#4 purple

pull the rubber boot back to see the numbers

silentservice703 · 03-23-2012, 06:47 AM

What years and models? Apparently something changed in MY 10 on the 1090RR...

Name: IMG_0508rTEXT.jpg
Views: 128
Size: 162.9 KB

Donsy · 03-23-2012, 06:53 AM

You're right Chuck, and if it is the same as on the F4's, then it changed somewhere between the 05 - 07 period too, as the ECU's changed I'm guessing.

MVINVB · 10-03-2012, 04:57 PM

Wow first post here...What a life saver this post is! I pulled the pins out of the connector to reverse polarity on the fuel indicator lamp ( PO fudged up things quite a bit) and figured the full wiring is listed in the manual. Then after I ripped it out, I looked only to find that the wiring labels for the fuel pump side of the harness was not indicated. Sweet, now I only have to: put away multimeter, install tank, affix helmet, enjoy the test ride.

theknurl · 10-04-2012, 12:01 AM

glad something i did helped

Welcome aboard the Forum MVINVB

10-04-2012, 12:01 AM	#5
theknurl Senior Member MV in the Registry: [F4 1000] [Brutale 910 R] Join Date: Jul 2009 Location: Palos Verdes Est, SoCal, USA Posts: 6,143	? glad something i did helped Welcome aboard the Forum MVINVB __________________ The Forum Curmudgeon i'm not PC either Noel-theknurl ph. 310-540-4823 PST, GMT -8 email, PayPal; theknurl@yahoo.com Skype; theknurl

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-22-2012, 06:22 PM	#1
theknurl Senior Member MV in the Registry: [F4 1000] [Brutale 910 R] Join Date: Jul 2009 Location: Palos Verdes Est, SoCal, USA Posts: 6,143	fuel pump wiring '04-'09 Brutale and F4 on the pumps, 3 checked #1 red #2 black #3 orange #4 white on 2 harnesses checked #1 green/black #2 blue #3 purple/white #4 purple pull the rubber boot back to see the numbers __________________ The Forum Curmudgeon i'm not PC either Noel-theknurl ph. 310-540-4823 PST, GMT -8 email, PayPal; theknurl@yahoo.com Skype; theknurl Last edited by theknurl : 03-23-2012 at 10:48 AM.

Remove Advertisements Sponsored Links
MVAgusta.net Advertisement

03-23-2012, 06:47 AM	#2
silentservice703 Senior Member MV in the Registry: [F4 1000 R 312] [View photo album] Join Date: Feb 2008 Location: In Duxbury, MA, USA with Lee and Patty in my heart. Posts: 6,191	What years and models? Apparently something changed in MY 10 on the 1090RR... __________________ *Keep your words soft and sweet...for somday you shall eat them!* A government that robs Peter to pay Paul can always depend upon the support of Paul. -- George Bernard Shaw

03-23-2012, 06:53 AM	#3
Donsy Senior Member MV in the Registry: [F4 1000 R] [View photo album] Join Date: Aug 2009 Location: Western Australia Posts: 9,260	+1 You're right Chuck, and if it is the same as on the F4's, then it changed somewhere between the 05 - 07 period too, as the ECU's changed I'm guessing. __________________ Dons Nel Manuals are here - http://www.teamdouble3racing.com/manuals

10-03-2012, 04:57 PM	#4
MVINVB New Member No MVs in the Registry Join Date: Sep 2012 Posts: 2	Wow first post here...What a life saver this post is! I pulled the pins out of the connector to reverse polarity on the fuel indicator lamp ( PO fudged up things quite a bit) and figured the full wiring is listed in the manual. Then after I ripped it out, I looked only to find that the wiring labels for the fuel pump side of the harness was not indicated. Sweet, now I only have to: put away multimeter, install tank, affix helmet, enjoy the test ride.