MV Agusta Forum banner

F3 eating up an R6

2K views 8 replies 7 participants last post by  rchase 
#1 ·
#8 ·
Been there done that numerous times with Steve on his MV, he pulled my RSV4 like the MV did to the R6 in the video, but the MV is shorter geared than the RSV4, so, one less tooth up front on the RSV4 and they both show 6000rpm/81 ish mph..................and the result is the other way around.

A lot of the difference can be down to gearing.

Having said that loosing one toothon the front means I will never see 201mph...bugger
 
#9 ·
Good point. A drag race is pretty much the lowest common denominator of speed. Many of the 1000cc bikes are great in a straight line but can get eaten alive by smaller displacement bikes when the road fails to be straight anymore. This becomes especially fun when the 1000cc rider is not as skilled as the rider of the smaller displacement machine.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top