Join Date: Nov 2009
Location: Warwickshire UK
water pump hoses
I found this evening that to fit the clik R clip correctly to the rear waterpump hose ( outflow ) , it's necessary to pull the clutch slave and water pump off so that the clip can be fitted from the rear facing side. This is to ensure that the spring clip which protrudes won't be able to rub on the outer water pump hose. If u don't do this the hose can be rubbed through and burst..
An easy job once you work out that you can't do it without pulling those two parts...but I did find myself going off thos clik R clips...
Last edited by gotojoe; 11-19-2012 at 05:51 PM.